LSF0108-Q100 8-bit bidirectional multi-voltage level translator open-drain push-pull Rev. 2 30 July 2020 Product data sheet 1. General description The LSF0108-Q100 is an 8 Channel bidirectional multi-voltage level translator for open-drain and push-pull applications. It supports up to 100 MHz up translation and 100 MHz down translation at 30 pF capacitive load. There is no need for a direction pin which minimizes system effort. The LSF0108-Q100 supports 5 V tolerant I/O pins for compatibility with TTL levels in a variety of applications. The ability to set up different voltage translation levels on each channel makes the device very flexible and suitable for a lot of different applications. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from -40 C to +125 C Bidirectional voltage translation with no direction pin Up translation 100 MHz C = 30 pF L 40 MHz C = 50 pF L Down translation 100 MHz C = 30 pF L 40 MHz C = 50 pF L Hot insertion Bidirectional voltage level translation between: 0.95 V and 1.8 V, 2.5 V, 3.3 V and 5.0 V 1.2 V and 1.8 V, 2.5 V, 3.3 V and 5.0 V 1.8 V and 2.5 V, 3.3 V and 5.0 V 2.5 V and 3.3 V and 5.0 V 3.3 V and 5.0 V Low standby current 5 V tolerant I/O pins to support TTL Low R provides less signal distortion ON High-impedance I/O pins for EN = Low. Flow-through pinout for easy PCB trace routing. Latch-up performance exceeds 100 mA per JESD78 class II level A ESD protection: HBM ANSI/ESDA/JEDEC JS-001 exceeds 2000 V CDM ANSI/ESDA/JEDEC JS-002 exceeds 1000 V DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder jointsNexperia LSF0108-Q100 8-bit bidirectional multi-voltage level translator open-drain push-pull 3. Applications 2 GPIO, MDIO, PMBus, SMBus, SDIO, UART, I C, and other interfaces in Telecom infrastructure Industrial Personal computing Automotive 4. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version LSF0108PW-Q100 -40 C to +125 C TSSOP20 plastic thin shrink small outline package SOT360-1 20 leads body width 4.4 mm LSF0108BQ-Q100 -40 C to +125 C DHVQFN20 plastic dual in-line compatible SOT764-1 thermal enhanced very thin quad flat package no leads 20 terminals body 2.5 4.5 0.85 mm 5. Functional diagram refA refB A1 B1 A2 B2 A3 B3 A4 B4 A5 B5 A6 B6 A7 B7 A8 B8 EN aaa-030280 Fig. 1. Logic symbol LSF0108 Q100 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 2 30 July 2020 2 / 12