NXS0101 Dual supply translating transceiver open drain auto direction sensing Rev. 3.1 23 August 2021 Product data sheet 1. General description The NXS0101 is a 1-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features one 1-bit input-output port (A and B), one output enable input (OE) and two supply pins (V and V ). V can be supplied at CC(A) CC(B) CC(A) any voltage between 1.65 V and 3.6 V and V can be supplied at any voltage between 2.3 V CC(B) and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins A and OE are referenced to V and pin B is referenced to V . CC(A) CC(B) A LOW level at pin OE causes the output to assume a high-impedance OFF-state. This device is fully specified for partial power-down applications using I . The I circuitry disables the output, OFF OFF preventing the damaging backflow current through the device when it is powered down. 2. Features and benefits Wide supply voltage range: V : 1.65 V to 3.6 V and V : 2.3 V to 5.5 V CC(A) CC(B) Maximum data rates: Push-pull: 24 Mbps I circuitry provides partial Power-down mode operation OFF Inputs accept voltages up to 5.5 V ESD protection: HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 kV for A port HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 8 kV for B port CDM: ANSI/ESDA/Jedec JS-002 Class C3 exceeds 1.5 kV Latch-up performance exceeds 100 mA per JESD 78B Class II Multiple package options Specified from -40 C to +85 C and -40 C to +125 C 3. Applications Desktop PC Handset Smartphone TabletNexperia NXS0101 Dual supply translating transceiver open drain auto direction sensing 4. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version NXS0101GW -40 C to +125 C SC-88 plastic surface-mounted package 6 leads SOT363 NXS0101GM -40 C to +125 C XSON6 plastic extremely thin small outline package no leads SOT886 6 terminals body 1 1.45 0.5 mm NXS0101GS -40 C to +125 C XSON6 extremely thin small outline package no leads SOT1202 6 terminals body 1.0 1.0 0.35 mm 5. Marking Table 2. Marking Type number Marking code 1 NXS0101GW m1 NXS0101GM m1 NXS0101GS m1 1 The pin 1 indicator is located on the lower left corner of the device, below the marking code. 6. Functional diagram V V CC(A) CC(B) OE T1 T2 ONE ONE SHOT SHOT 10 k 10 k GATE BIAS T3 A B aaa-030598 Fig. 1. Functional diagram NXS0101 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2021. All rights reserved Product data sheet Rev. 3.1 23 August 2021 2 / 21