NXS0102DCH Nexperia

NXS0102 Dual supply translating transceiver open drain auto direction sensing Rev. 5 6 September 2021 Product data sheet 1. General description The NXS0102 is a 2-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 2-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (V and V ). V can be supplied at CC(A) CC(B) CC(A) any voltage between 1.65 V and 3.6 V and V can be supplied at any voltage between 2.3 V CC(B) and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to V and pins Bn are referenced to CC(A) V . A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This CC(B) device is fully specified for partial power-down applications using I . The I circuitry disables OFF OFF the output, preventing the damaging backflow current through the device when it is powered down. 2. Features and benefits Wide supply voltage range: V : 1.65 V to 3.6 V and V : 2.3 V to 5.5 V CC(A) CC(B) Maximum data rates: Push-pull: 24 Mbps I circuitry provides partial Power-down mode operation OFF Inputs accept voltages up to 5.5 V ESD protection: HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 kV for A port HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 8 kV for B port CDM: ANSI/ESDA/Jedec JS-002 Class C3 exceeds 1.5 kV Latch-up performance exceeds 100 mA per JESD 78B Class II Multiple package options Specified from -40 C to +85 C and -40 C to +125 C 3. Applications Desktop PC Handset Smartphone TabletNexperia NXS0102 Dual supply translating transceiver open drain auto direction sensing 4. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version NXS0102DC -40 C to +125 C VSSOP8 plastic very thin shrink small outline package 8 leads SOT765-1 body width 2.3 mm NXS0102GT -40 C to +125 C XSON8 plastic extremely thin small outline package no leads SOT833-1 8 terminals body 1 1.95 0.5 mm NXS0102UN -40 C to +125 C WLCSP8 wafer level chip-scale package 8 bumps SOT8023-1 0.75 1.55 0.60 mm 5. Marking Table 2. Marking Type number Marking code NXS0102DC m2 NXS0102GT m2 NXS0102UN m2 6. Functional diagram V V CC(A) CC(B) OE T1 T2 ONE ONE SHOT SHOT 10 k 10 k GATE BIAS T3 A B aaa-030598 Fig. 1. Functional diagram (one channel) NXS0102 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2021. All rights reserved Product data sheet Rev. 5 6 September 2021 2 / 21