NXS0104BQX Nexperia

NXS0104 Dual supply translating transceiver open drain auto direction sensing Rev. 4 30 June 2021 Product data sheet 1. General description The NXS0104 is a 4-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 4-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (V and V ). V can be supplied at CC(A) CC(B) CC(A) any voltage between 1.65 V and 3.6 V and V can be supplied at any voltage between 2.3 V CC(B) and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to V and pins Bn are referenced to CC(A) V . A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This CC(B) device is fully specified for partial power-down applications using I . The I circuitry disables OFF OFF the output, preventing the damaging backflow current through the device when it is powered down. 2. Features and benefits Wide supply voltage range: V : 1.65 V to 3.6 V and V : 2.3 V to 5.5 V CC(A) CC(B) Maximum data rates: Push-pull: 24 Mbps I circuitry provides partial Power-down mode operation OFF Inputs accept voltages up to 5.5 V ESD protection: HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 kV for A port HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 15 kV for B port CDM: ANSI/ESDA/Jedec JS-002 Class C3 exceeds 1.5 kV IEC61000-4-2 contact discharge exceeds 8000 V for B port Latch-up performance exceeds 100 mA per JESD 78B Class II Multiple package options Specified from -40 C to +85 C and -40 C to +125 C 3. Applications Desktop PC Handset Smartphone TabletNexperia NXS0104 Dual supply translating transceiver open drain auto direction sensing 4. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version NXS0104PW -40 C to +125 C TSSOP14 plastic thin shrink small outline package 14 leads SOT402-1 body width 4.4 mm NXS0104BQ -40 C to +125 C DHVQFN14 plastic dual in-line compatible thermal enhanced SOT762-1 very thin quad flat package no leads 14 terminals body 2.5 3 0.85 mm NXS0104GU12 -40 C to +125 C XQFN12 plastic, extremely thin quad flat package no leads SOT1174-1 12 terminals body 1.70 2.0 0.50 mm NXS0104UM -40 C to +125 C WLCSP12 wafer level chip-scale package 12 bumps SOT8019-1 1.36 1.86 0.60 mm 5. Marking Table 2. Marking Type number Marking code NXS0104PW NXS0104 NXS0104BQ S0104 NXS0104GU12 m4 NXS0104UM m4 NXS0104 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2021. All rights reserved Product data sheet Rev. 4 30 June 2021 2 / 23