NXS0104-Q100 Dual supply translating transceiver open drain auto direction sensing Rev. 4 13 November 2020 Product data sheet 1. General description The NXS0104-Q100 is a 4-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 4-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (V and V ). V can be supplied at CC(A) CC(B) CC(A) any voltage between 1.65 V and 3.6 V and V can be supplied at any voltage between 2.3 V CC(B) and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to V and pins Bn are referenced to CC(A) V . A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This CC(B) device is fully specified for partial power-down applications using I . The I circuitry disables OFF OFF the output, preventing the damaging backflow current through the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from -40 C to +85 C and from -40 C to +125 C Wide supply voltage range: V : 1.65 V to 3.6 V and V : 2.3 V to 5.5 V CC(A) CC(B) Maximum data rates: Push-pull: 24 Mbps I circuitry provides partial Power-down mode operation OFF Inputs accept voltages up to 5.5 V ESD protection: HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 kV for A port HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 15 kV for B port MIL-STD-883, method 3015 Class 2 exceeds 2.5 kV for A port MIL-STD-883, method 3015 Class 3B exceeds 15 kV for B port IEC61000-4-2 contact discharge exceeds 8000 V for B port Latch-up performance exceeds 100 mA per JESD 78B Class II DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version NXS0104PW-Q100 -40 C to +125 C TSSOP14 plastic thin shrink small outline package 14 leads SOT402-1 body width 4.4 mm NXS0104BQ-Q100 -40 C to +125 C DHVQFN14 plastic dual in-line compatible thermal enhanced SOT762-1 very thin quad flat package no leads 14 terminals body 2.5 3 0.85 mmNexperia NXS0104-Q100 Dual supply translating transceiver open drain auto direction sensing 4. Marking Table 2. Marking Type number Marking code NXS0104PW-Q100 NXS0104 NXS0104BQ-Q100 S0104 5. Functional diagram V V CC(A) CC(B) OE T1 T2 ONE ONE SHOT SHOT 10 k 10 k GATE BIAS T3 A1 B1 T1 T2 ONE ONE SHOT SHOT 10 k 10 k GATE BIAS T3 A2 B2 T1 T2 ONE ONE SHOT SHOT 10 k 10 k GATE BIAS T3 A3 B3 T1 T2 ONE ONE SHOT SHOT 10 k 10 k GATE BIAS T3 A4 B4 aaa-029696 Fig. 1. Logic symbol NXS0104 Q100 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 4 13 November 2020 2 / 19