Product Specification PTRONxONFxxS Gas Discharge Tube Lightning Arrestor N Connectors and a Replaceable Protective Element Features: Frequency to 3.2 GHz Excellent RF Performance Multiple Strike Capability 50 kA Surge Protection Bi-directional Protection Rugged and Waterproof High RF Power and Low PIM RF Specifications Nominal Impedance 50 Frequency Insertion VSWR (GHz) Loss (dB) dc 2.5 1.15 Max 0.10 Max 2.5 3.0 1.20 Max 0.15 Max 3. 0 3.2 1.35 Typ 0.25 Typ Through Current: 65V/10A Max RF Power: See Protection Voltage table PIM3: -116 dBc (2X43 dBm 1.9 GHz tones) Transient Specifications (1.2X50 s Voltage / 8X20 s Current waveform) Maximum Transient: 50 kA Multiple Strike: 20 kA 10 times Let-through: See Protection Voltage table Replaceable Gas Discharge Tube 90V to 1000V Typical VSWR and Insertion Loss 2006 NexTek, Inc. This specification is for reference only, and is subject to change without notice Page 1 of 2 439 Littleton Road (978) 486-0582 Westford, MA 01886 www.nexteklightning.com Product Specification PTRONxONFxxS Mechanical Specifications Weight 0.28 pounds typ/125 g typ Environmental Specifications o o Temperature Range -40 C to +90 C o Salt Fog MIL-STD-202 Method 101D / Condition B (35 C/96 hrs) o o MIL-STD-202 Method 104A / Condition A (65 C to 25 C w/NaCl 2 Immersion o l) Moisture Resistance MIL-STD-202 Method 106E (65 C/98% RH condensing/240 hrs) o o Temperature Shock MIL-STD-202 Method 107D / Condition B-1 (25 cycles -65 C to +125 C) o Life (Elevated Temperature) MIL-STD-202 Method 108A / Condition A (96 hours at 100 C) Dust and Waterproof Rating IEC529 IP68 (dust-tight and water proof 24 hrs / 1 m) Vibration MIL-STD-202 Method 204D / Condition D (10Hz-2kHz 0.06DA/20g) Mechanical Shock MIL-STD-202 Method 213 / Condition A (50g/11ms ~24) Material and Finish Protection Voltage Protectio Voltage RF Power Let-through Component Material Finish 1 2 3 n Voltage Code (W) (V / mJ) pk Outer Parts Brass Guardplate 90 09 37 600 / 0.3 Center Contact BeCu Gold 150 15 95 600 / 0.3 Insulator PTFE - 230 23 240 650 / 0.5 Gasket Si Rubber - 350 35 550 800 / 0.7 Guardplate is an alloy finish with the PIM and conductivity 470 47 1000 1200 / 2.2 of Silver and the durability and anti-tarnish properties of 600 60 1600 1500 / 4.4 Nickel. 1 Use the voltage code in the part number 800 80 2900 1900 / 9.0 2 For multiple carriers, sum of peak voltages 1000 99 4500 2200 / 14 should not exceed 60% of the protection voltage 3 Input is 6kV 1.2x50s/ 3kA 8x20s. Part Number Shown with optional bead chain kit PTR ONXONF XX S S Specifies the Standard model, (P/N 780-0333) mounting dimensions shown above M unit Voltage Code - select based on the RF power. Use 23 for most applications pictured. Connector Codes ONF ONF for female to female, Need other ONM ONF for male to female photo PTR Family - (Protector w/ replaceable Gas Discharge Tubes) 2006 NexTek, Inc. This specification is for reference only, and is subject to change without notice Page 2 of 2