NACX221M6.3V6.3X5.5TR13F NIC

Surface Mount Aluminum Electrolytic Capacitors NACX Series FEATURES CYLINDRICAL V-CHIP CONSTRUCTION VERY LOW IMPEDANCE AT 100KHz RoHS O WIDE TEMPERATURE RANGE (-55 +105 C) Compliant includes all homogeneous materials MAXIMUM 5.5mm HEIGHT ANTI-SOLVENT (2 MINUTES) *See Part Number System for Details DESIGNED FOR REFLOW SOLDERING MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage Range 6.3 ~ 63V 1.0 ~ 150F Rated Capacitance Range Operating Temperature Range -55 ~ +105C Capacitance Tolerance 20% (M), 10% (K)* Max. Leakage Current After 2 Minutes at 20C 0.01CV or 3A whichever is greater W.V. (Vdc) 6.3 10 16 25 35 50 63 Surge Voltage and Max. Tan S.V.(Vdc) 8 13 20 32 44 63 79 Tan 0.24 0.20 0.16 0.14 0.12 0.12 0.12 Z-25C/Z+20C 3 2 2 2 2 2 2 Low Temperature Stability (Impedance Ratio 120Hz) Z-55C/Z+20C 5 4 4 3 3 3 3 Capacitance Change Within 25% of initial measured value High Temperature Load Life at 105C and Rated Working Voltage Tan Less than 200% of specified value 1,000 hours Leakage Current Less than the specified value * Optional 10% (K) Tolerance available on most values. Contact factory for availability. STANDARD PRODUCT AND SIZE DxL (mm) D Working Voltage (Vdc) Cap. Code (F) 6.3 10 16 25 35 50 63 1.0 1R0 - - - - 4x5.5 4x5.5 4x5.5 2.2 2R2 - - - - 4x5.5 4x5.5 4x5.5 3.3 3R3 - - - - 4x5.5 4x5.5 5x5.5 0.3mm max. L 4.7 4R7 - - - 4x5.5 4x5.5 5x5.5 5x5.5 10 100 - - 4x5.5 5x5.5 5x5.5 6.3x5.5 6.3x5.5 22 220 4x5.5 5x5.5 5x5.5 6.3x5.5 6.3x5.5 - - 33 330 5x5.5 5x5.5 6.3x5.5 6.3x5.5 - - - 47 470 5x5.5 6.3x5.5 6.3x5.5 6.3x5.5 - - - + - I I 100 101 6.3x5.5 6.3x5.5 6.3x5.5 - - - - 220 221 6.3x5.5 - - - - - - W A DIMENSIONS (mm) Case Size D0.5 L max. A/B0.2 I 0.2 W P0.2 P 4x5.5 4.0 5.5 4.3 1.8 0.5 ~ 0.8 1.0 5x5.5 5.0 5.5 5.3 2.1 0.5 ~ 0.8 1.4 B 6.3x5.5 6.3 5.5 6.6 2.5 0.5 ~ 0.8 2.2 PART NUMBER SYSTEM NACX 100 M 25V 5x5.5 TR 13 Y P F RoHS Compliant 97% Sn (min.), 3% Bi (max.) Optional plastic reel (standard material is cardboard). See page 4 330mm (13) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in F, first 2 digits are significant Third digit is no. of zeros, R indicates decimal for values under 10F Series Optional: Suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 1 SPECIFICATIONS ARE SUBJECT TO CHANGESurface Mount Aluminum Electrolytic Capacitors NACX Series STANDARD VALUES, CASE SIZES AND SPECIFICATIONS Cap. W.V. Dissipaton Factor Max. Ripple Current (mA) Max. Z () Load Life Hours NIC Part Number (F) (Vdc) (Tan ) +105C/100kHz +20C/100kHz +105C NACX220M6.3V4x5.5TR13F 22 0.24 68 2.3 1,000 NACX330M6.3V5x5.5TR13F 33 0.24 105 1.1 1,000 NACX470M6.3V5x5.5TR13F 47 6.3 0.24 105 1.1 1,000 NACX101M6.3V6.3x5.5TR13F 100 0.24 155 0.6 1,000 NACX221M6.3V6.3x5.5TR13F 220 0.24 155 0.6 1,000 NACX220M10V5x5.5TR13F 22 0.20 105 1.1 1,000 NACX330M10V5x5.5TR13F 33 0.20 105 1.1 1,000 10 NACX470M10V6.3x5.5TR13F 47 0.20 155 0.6 1,000 NACX101M10V6.3x5.5TR13F 100 0.20 155 0.6 1,000 NACX100M16V4x5.5TR13F 10 0.16 68 2.3 1,000 NACX220M16V5x5.5TR13F 22 0.16 105 1.1 1,000 NACX330M16V6.3x5.5TR13F 33 16 0.16 155 0.6 1,000 NACX470M16V6.3x5.5TR13F 47 0.16 155 0.6 1,000 NACX101M16V6.3x5.5TR13F 100 0.16 155 0.6 1,000 NACX4R7M25V4x5.5TR13F 4.7 0.14 68 2.3 1,000 NACX100M25V5x5.5TR13F 10 0.14 105 1.1 1,000 NACX220M25V6.3x5.5TR13F 22 25 0.14 155 0.6 1,000 NACX330M25V6.3x5.5TR13F 33 0.14 155 0.6 1,000 NACX470M25V6.3x5.5TR13F 47 0.14 155 0.6 1,000 NACX1R0M35V4x5.5TR13F 1.0 0.12 68 3.1 1,000 NACX2R2M35V4x5.5TR13F 2.2 0.12 68 2.9 1,000 NACX3R3M35V4x5.5TR13F 3.3 0.12 68 2.7 1,000 35 NACX4R7M35V4x5.5TR13F 4.7 0.12 68 2.3 1,000 NACX100M35V5x5.5TR13F 10 0.12 105 1.1 1,000 NACX220M35V6.3x5.5TR13F 22 0.12 155 0.6 1,000 NACX1R0M50V4x5.5TR13F 1.0 0.12 37 7.4 1,000 NACX2R2M50V4x5.5TR13F 2.2 0.12 45 6.6 1,000 NACX3R3M50V4x5.5TR13F 3.3 50 0.12 52 5.4 1,000 NACX4R7M50V5x5.5TR13F 4.7 0.12 75 2.9 1,000 NACX100M50V6.3x5.5TR13F 10 0.12 120 1.3 1,000 NACX1R0M63V4x5.5TR13F 1.0 0.12 20 8.0 1,000 NACX2R2M63V4x5.5TR13F 2.2 0.12 24 8.0 1,000 NACX3R3M63V5x5.5TR13F 3.3 63 0.12 40 3.5 1,000 NACX4R7M63V5x5.5TR13F 4.7 0.12 40 3.5 1,000 NACX100M63V6.3x5.5TR13F 10 0.12 65 1.6 1,000 For Automotive Equipment, see part number system RIPPLE CURRENT FREQUENCY CORRECTION FACTORS Capacitance Frequency (F) 100Hz < F < 1KHz 1KHz < F < 10KHz 10KHz < F < 100KHz 100KHz < F C < 1.0 0.70 0.55 0.85 1.00 1 < C < 4.7 0.25 0.60 0.90 1.00 4.7 < C < 47 0.45 0.75 0.92 1.00 47 < C 0.60 0.85 0.92 1.00 RECOMMENDED LAND PATTERN DIMENSIONS (mm) Case Size a b c a 4 1.0 2.6 1.8 5 1.4 3.0 1.8 c 6.3 2.1 3.5 1.8 b PRECAUTIONS Please review the notes on correct use, safety and precautions found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NICs technical support personnel: tpmg niccomp.com Review & Compare Reflow Soldering Heat Limits V-chip SMT Aluminum Electrolytic Capacitors www.niccomp.com/RSL NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 2 SPECIFICATIONS ARE SUBJECT TO CHANGE