Multilayer Ceramic Chip Capacitors NMC Series NPO FEATURES CLASS I DIELECTRIC, TEMPERATURE COMPENSATING HIGH STABILITY OVER TIME, VOLTAGE AND Expanded TEMPERATURE CHANGES Value Range LOW DIELECTRIC LOSS NICKEL BARRIER TERMINATIONS AND EXCELLENT Up to 0.1F MECHANICAL STRENGTH SPECIFICATIONS Capacitance Range 0.3pF to 0.1F <5pF: 0.1pF(B), 0.25pF(C) Capacitance Tolerance >5pF to <10pF: 0.1pF(B), 0.25pF(C), 0.5pF(D) 10pF and above: 1%(F), 2%(G), 5% (J) Operating Temperature Range -55C ~ +125C Temperature Characteristics 0 30ppm/C Rated Voltages 10Vdc, 16Vdc, 25Vdc, 35Vdc, 50Vdc, 100Vdc (see NMC-H Series for higher voltages) Dissipation Factor For values >30pF 0.1% 25C For values < 30pF Q=400+20 x C (C in pF) insulation Resistance 10,000Megohms min. or 500Megohm/ F (min.), whichever is less +25C Dielectric Withstanding Voltage 250% of Rated Voltage for 1 ~ 5 seconds, 50mA maximum current Test Conditions (EIA-198-2E) <1000pF 1MHz, 1.2Vrms max. or >1000pF 1KHz, 1.2Vrms max. Note: Reflow soldering allowed for all case sizes. Contact NIC for wave soldering restrictions. Voltage Coefficient of Minimum Insulation Resistance Capacitance - NPO vs Temperature Typical NPO Temperature Coefficient 10,000 0.2 0.4 0.3 0.2 0.1 1000 0.1 0.0 0.0 -0.1 100 -0.2 -0.1 -0.3 -0.4 -0.2 10 -55 -25 0 25 50 75 100 125 0 10 20 30 40 50 60 70 80 90 100 10 25 100 150 Temperature (Degrees Celsius) DC Volts Applied Temperature (Degrees C) Aging Rate - NPO Impedance vs. Frequency NPO 0.2 1000 100 0.1 1000pF 100pF 10 0.0 1 -0.1 0.1 -0.2 0.01 1 10 100 1000 10000 1 10 100 1000 Hours Frequency (MHz) PART NUMBER SYSTEM NMC 0805 NPO 101 J 50 TRP or TRPLP 3K F RoHS Compliant 3 denotes optional reel quantity or 4 denotes optional 4mm carrier width (01005 case size only) Tape & Reel (Embossed Plastic Carrier) Tape & Reel (Punched carrier) Voltage (Vdc) Capacitance Tolerance Code (see chart) Capacitance Code, expressed in pF, first 2 digits are significant, 3rd digit is no. of zeros, R indicates decimal for under 10pF Temperature Characteristic Size Code (see chart) Series NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 1 Specifications are subject to changeMultilayer Ceramic Chip Capacitors NMC Series NPO EIA Case Size 01005 EIA Case Size 0201 0402 0603 0805 Length (L) 0.40.02 Length (L) 0.60.03 1.00.05 1.60.15 2.00.2 Width (W) 0.20.02 Width (W) 0.30.03 0.50.05 0.80.15 1.250.2 Thickness max. (T) 0.22 Thickness max. (T) 0.33 0.6 1.0 1.35 Termination Width Termination Width 0.10 +0.04/-0.03 0.150.05 0.20.1 0.12 ~ 0.51 0.25 ~ 0.71 (P) (P) Working Voltage (Vdc) Working Voltage (Vdc) Capacitance Capacitance 16 10 16 25 50 16 25 50 100 16 25 50 100 16 25 50 100 0.5pF 0.3pF & 0.4pF 0.6pF 0.47pF ~ 22pF 0.7pF 24pF 0.8pF 27pF 0.9pF 30pF 1.0pF 33pF 1.1pF 36pF 1.2pF 39pF 1.3pF 43pF 1.5pF 47pF 1.6pF 51pF 1.8pF 56pF 2.0pF 62pF 2.2pF 68pF 2.4pF 75pF 2.5pF 82pF 2.7pF 91pF 3.0pF 100pF 3.3pF 110pF 3.6pF 120pF 3.9pF 130pF 4.0pF 150pF 4.7pF 160pF 5.0pF 180pF 5.6pF 200pF 6.0pF 220pF 6.2pF 240pF 6.8pF 270pF 7.0pF 300pF 7.5pF 330pF 8.0pF 360pF 8.2pF 390pF 9.0pF 430pF 9.1pF 470pF 10pF 510pF 12pF 560pF 15pF 620pF 18pF 680pF 22pF 750pF 27pF 820pF 33pF 910pF 39pF 0.001 F 47pF 0.0012 F 56pF 0.0015 F 68pF 0.0018 F 82pF 0.0022 F 100pF 0.0027 F * Highlighted values available on 4mm carrier, 0.0033 F * 40K pieces per reel. 0.0039 F * * 0.0047 F * (CONSULT FACTORY 0.0056 F * * FOR CAPACITANCE 0.0068 F * * VALUES NOT LISTED) 0.0082 F * * 0.01 F * * * *1.45mm maximum thickness NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 2 Specifications are subject to change
