PA-20-302R-U-3M Nidec Copal

PRESSURE TRANSDUCERS WITH AMP. PA-20 INTERNAL STRUCTURE marking Compatible with Universal joint EMC directive 6 1 4 3 5 2 Part name Material FEATURES Pressure Port SUS 304 1 Ultra-small size pressure transducer with Amp. Housing PC (Polycarbonate) 2 2 types of pressure ports are available Meet EMC standards Sensor module PPS (Polyphenylene sulphide) 3 O ring Fluoro-rubber 4 Cable Vynyl chloride 5 Gasket POM (Polyoxymethylene) 6 MODEL NUMBER DESIGNATION P A - 2 0 - 1 0 2 V - U - 3 M Series name Cable length Blank1.5 m 3M3 m Rated pressure range Pressure port 102V0 ~ 100 kPaGauge Vacuum UUniversal joint (M5 male screw) 302R100 ~ 300 kPaGauge Compound M2-M5 female screw LIST OF MODEL NUMBERS Rated pressure range kPa Pressure port Cable length 0 ~ 100 100 ~ 300 1.5 m PA-20-102V-U PA-20-302R-U Universal joint 3 m PA-20-102V-U-3M PA-20-302R-U-3M 1.5 m PA-20-102V-M PA-20-302R-M 2-M5 female screw 3 m PA-20-102V-M-3M PA-20-302R-M-3M Verify the above model numbers when placing orders. 48 PA-20 PRESSURE TRANSDUCERS WITH AMP. STANDARD SPECIFICATIONS Unless otherwise specified, the specs are defined at an ambient temperature of 255 C and excitation voltage of 24 V DC. PA-20 Item Model number 102V 302R Pressure reference Gauge Rated pressure range kPa 0 ~ 100 100 ~ 300 Maximum pressure kPa 200 600 Operating temp. range C 10 ~ 60 Compensated temp. range C 0 ~ 50 Operating humidity %RH 35 ~ 85No condensation Storage temp. C 20 ~ 70 Pressure medium Non-corrosive gases M Insulation resistance 100 minimum Dielectric strength 500 V AC, 60 s Net weight (Without cable) g Approx. 5 (PA-20- -U) Approx. 8 (PA-20- -M) Supply voltage V DC 10.8 ~ 30 Including ripple percentage mA Consumption current 20 maximum Output voltage V 1 ~ 5 mA Output current 1 Load resistance : 5 k minimum maximum Linearity/Hysteresis %F.S. 0.5 ZERO %F.S. 2 Thermal error (Reference temp.: 25 C) SPAN %F.S. 2 Response ms Approx.1 ENVIRONMENTAL CHARACTERISTICS Test item Test conditions permissible change Vibration 10 ~ 55 Hz, 1.5 mm, 3 directions for 2 hours each 2 Shock 1000 m/s , 3 directions for 3 times each Analog output : 2 %F.S. maximum after test 6 Pressure cycling 0 ~ Rated pressure, 10 cycles Moisture resistance 40 C, 90 ~ 95 %RH, 240 h. EMI : EN55011: 2007, A2 : 2007 Group 1, class B EMC Analog output 5 %F.S. maximum during test EMS : EN61326-1 : 2006/EN61326-2-3 : 2006 Table 2 Analog output Power General specifications