PG-35-103R-NR2 Nidec Copal

PRESSURE GAUGES PG-35 &. INTERNAL STRUCTURE 5 marking Compatible with (R 1/4) EMC directive 4 3 6 8 7 2 1 Part name Material FEATURES Fitting SUS316L Both absolute pressure type and compound pres sure Sensor module SUS316L type are available Compound pressure type measures negative and positive gauge Adaptor Aluminum pressure. FPC Polymide Compact and lightweight general-purpose pressure gauges Case PBT(Polybutyleneterphthalate) Innovative general-purpose gauges of compact design (30mm sq.) and drip-proof structure (IP65). Panel sheet Polyester Clear indication by LED Easy-to-see LED assures clear readings on the panel and even in a O ring NBR dark place. Sensor holder SUS316L Various modes and units can be selected according to applications Eight different pressure units Three analog output modes Eight switch output modes Meet EMC standards EN 55011 (EMI) EN 61326-1 (EMS) Low consumption by nondisplay mode Set data protection by panel lock function PG-35 PRESSURE GAUGES MODEL NUMBER DESIGNATION High corrosion resistance type P G - 3 5 - 1 0 2 R - N R 2 B Series name Port BlankStem mount Pressure range BBack mount 102R 100 100 kPaCompound pressure Negative pressure Positive pressure Fitting 102A 0 100 kPaAbsolute pressure Absolute vacuum Barometic pressure R2R 1/4With M5 female screw 103R 100 1000 kPaCompound pressure Negative pressure Positive pressure GFG 3/8Flush diaphragm type G2G 1/4With M5 female screw Pressure reference VC9/16-18UNF (Gusket joint) RCompound pressure (Negative pressure Positive pressure) AAbsolute pressure (Absolute vacuum Barometic pressure) Switch output interface NNPN open collector PPNP open collector LIST OF MODEL NUMBERS Pressure reference Gauge Absolute Switch output Pressure medium Fitting Port interface Rated pressure range 100 100 kPa 100 1000 kPa 0 100 kPa abs Stem mount PG-35-102R-NR2 PG-35-103R-NR2 PG-35-102A-NR2 NPN Back mount PG-35-102R-NR2B PG-35-103R-NR2B PG-35-102A-NR2B R 1/4 Stem mount PG-35-102R-PR2 PG-35-103R-PR2 PG-35-102A-PR2 PNP Back mount PG-35-102R-PR2B PG-35-103R-PR2B PG-35-102A-PR2B PG-35-102R-NGF PG-35-103R-NGF PG-35-102A-NGF NPN G 3/8 Stem mount Corrosive gases/ PNP PG-35-102R-PGF PG-35-103R-PGF PG-35-102A-PGF liquids compatible with Stem mount PG-35-102R-NVC PG-35-103R-NVC PG-35-102A-NVC SUS 316L 9/16- NPN Back mount PG-35-102R-NVCB PG-35-103R-NVCB PG-35-102A-NVCB Stem mount PG-35-102R-PVC PG-35-103R-PVC PG-35-102A-PVC PNP 18UNF Back mount PG-35-102R-PVCB PG-35-103R-PVCB PG-35-102A-PVCB NPN PG-35-102R-NG2 PG-35-103R-NG2 PG-35-102A-NG2 G 1/4 Stem mount PNP PG-35-102R-PG2 PG-35-103R-PG2 PG-35-102A-PG2 Verify the above model numbers when placing orders. The products marked are manufactured upon receipt of order basis. ENVIRONMENTAL CHARACTERISTICS Test item Test conditions Permissible change 2 Vibration 10 500 Hz, 98.1 m/s or 1.5 mm P-P, 3 directions for 2 hours each 2 2 %F.S. maximum after test 1 490 m/s , 3 directions for 3 times each Shock Amount of analog output fluctuation is permitted 6 Pressure cycling 0 Rated pressure10 cycles by adding conversion error of 20 mV. Moisture resistance 40 C, 90 95 %RH, 240 hrs. EMI : EN55011: 2007, A2 : 2007 Group 1, class B Pressure indication, switch operating pressure and EMC EMS : EN61326-1 : 2006 Table 2 analog output : 5 %F.S. maximum during test 1 Change in the pressure indication, switch operating points and analog output.