PRESSURE SWITCHES WITH GAUGE PS30 &. INTERNAL STRUCTURE 5 1 marking 4 Compatible with EMC directive 2 3 6 Part name Material FEATURES Pressure transducer P-2000 Optimum for pneumatic equipment and semiconductor O ring Fluoro-rubber manufacturing equipment Larger size display and high luminance LED for best Pressure port Brass (Ni-plated) visibility Base Eight switch output modes ABS Low consumption by nondisplay mode (Acrylonitrile-butadiene-styrene) Housing Panel sheet Polyester MODEL NUMBER DESIGNATION P S 3 0 - 1 0 2 R - N Series name Switch output interface NNPN open collector PPNP open collector Rated pressure range 102R100 100 kPa 103R0.1 MPa 1.00 MPa LIST OF MODEL NUMBERS Pressure reference Gauge Switch output interface Rated pressure range 100 ~ 100 kPa 100 ~ 1000 kPa NPN PS30-102R-N PS30-103R-N PNP PS30-102R-P PS30-103R-P Please refer to the LIST OF MODEL NUMBERS when placing orders. PS30 PRESSURE SWITCHES WITH GAUGE STANDARD SPECIFICATIONS Unless otherwise specified, the specs are defined at an ambient temperature of 25 5 C and excitation voltage of 24 V DC. PS30 Item Model number 102R 103R Pressure reference Gauge Rated pressure range kPa 100 ~ 100 100 ~ 1000 Maximum pressure kPa 200 1500 Break-down pressure kPa 500 2000 Operating temp. range C 10 ~ 50 Compensated temp. range C 0 ~ 50 Thermal error 3 %F.S. (0 ~ 50 C) Operating humidity %RH 35 85No condensation Storage temp. C 20 70Atmospheric pressure, humidity 65 %RH maximum Pressure medium Non-corrosive gases Insulation resistance Mminimum 100 (DC 500 V) Dielectric strength 500 V AC, 60 sLeakage current 1 mA maximum Pressure port M5 female screw, O ring groove (P8) Net weight g Approx. 60Including 1.5 m cable Supply voltage V DC 12 24 V 10 %Including ripple voltage Consumption current mA maximum 40 Display element LED2 and 1/2 digit kPa 100 100 Rated display range MPa 0.10 1.00 Display accuracy 1 %F.S. Resolution 1 count No. of outputs 2 Output interface Open collector output (NPN or PNP) Display Output 1 (SW1), Output 2 (SW2) Light on when output is ON. Repeatability %F.S. 0.3 maximum Switch hysteresis 0 ~ 30 countsAdjustable Switching capacity 30 V DC100 mA maximumShort-circuit protection Residual voltage V maximum 1.2 V (NPN), 2.2 V (PNP) Response ms Approx 5, 25, 250Adjustable ENVIRONMENTAL CHARACTERISTICS Test item Test conditions Permissible change 2 10 ~ 500 Hz, 98.1 m/s or 1.5 mm P-P, 3 directions for 2 hours each Vibration 2 490 m/s , 3 directions for 3 times each Shock 2 %F.S. maximum after test 6 Pressure cycling 0 ~ Rated pressure10 cycles Moisture resistance 40 C, 90 ~ 95 %RH, 240 hrs. EMI : EN55011: 2007, A2 : 2007 Group 1, class B EMC Switch operating pressure : 5 %F.S., maximum during tset1 EMS : EN61326-1 : 2006 Table 2 Change in the pressure indication, switch operating points. Switch output Display Power General specifications