PA-800-102V-10 Nidec Copal

PS8/PA-800 PRESSURE TRANSDUCERS WITH AMP. PA-800 INTERNAL STRUCTURE PA-800 2 1 4 5 3 Part name Material FEATURES Stainless steel diaphragm SUS 316L High corrosion resistance by double diaphragm structure Sealed liquid Silicone oil Built-in amplifier circuit Built-in temperature compensation function O ring Fluoro-rubber (0 ~ 50 C) Sensor chip Silicone Voltage output mode Fitting SUS 316 MODEL NUMBER DESIGNATION PA-800 - 102 G - 05 Series name Thermal error 050.05 % F.S./C 100.1 % F.S./C Rated pressure range 2 1020 ~ 98.1 kPa 0 ~ 1 kgf/cm 2 3520 ~ 343 kPa 0 ~ 3.5 kgf/cm Pressure reference 2 1030 ~ 981 kPa 0 ~ 10 kgf/cm GGauge V Gauge (Vacuum) LIST OF MODEL NUMBERS Pressure reference Gauge Output 2 kPa kgf/cm 0 ~ 98.1 0 ~ 343 0 ~ 981 0 ~ 98.1 Thermal error Rated pressure range 0 ~ 1 0 ~ 3.5 0 ~ 10 0 ~ 1 0.05 % F.S./C PA-800-102G-05 PA-800-352G-05 PA-800-103G-05 PA-800-102V-05 Voltage output 0.1 % F.S./C PA-800-102G-10 PA-800-352G-10 PA-800-103G-10 PA-800-102V-10 Verify the above model numbers when placing orders.PA-800 PRESSURE TRANSDUCERS WITH AMP. STANDARD SPECIFICATIONS Unless otherwise specified, the specs are defined at an ambient temperature of 255 C and excitation voltage of 12 V DC. PA-800 Item Model number 102G 102V 352G 103G Pressure reference Gauge 98.1 98.1 343 981 2 Rated pressure range kPa kgf/cm 1 1 3.5 10 196 686 1961 2 Maximum pressure kPa kgf/cm 2 7 20 294 1030 2942 2 Break-down pressure kPa kgf/cm 3 10.5 30 Operating temp. range C 20 ~ 70 Compensated temp. range C 0 ~ 50 Operating humidity %RH 35 ~ 85No condensation Storage temp. C 20 ~ 80Atmospheric pressure, humidity 65 %RH maximum Pressure medium Corrosive gases/liquids compatible with SUS316L and SUS304 M Insulation resistance 100 (500 V DC) minimum Dielectric strength 500 V AC, 60 sLeakage current 1 mA maximum Sealed liquid Silicone oil Pressure port G 3/8 (PF 3/8) 1 Net weight g Approx. 125 Supply voltage V DC 12 ~ 24 10 % Ripple content maximum 10 % (P-P) mA Consumption current 20 maximum Output voltage V DC 1 ~ 5 Zero voltage V 1 0.04 (at 25 C) Span voltage V 4 0.04 (at 25 C) mA Output current 1Load resistance 5 k minimum maximum Linearity/Hysteresis %F.S. 0.3 0.5 Thermal error ZERO %F.S./C 0.05/ 0.1 0 ~ 50 C (Reference temp.: 25 C) SPAN %F.S./C 0.05/ 0.1 V Supply voltage effect 0.1 maximum Response ms Approx. 2 Gravitational effect %F.S. Approx. 0.5 Approx. 0.15 Approx. 0.05 (From vertical position to horizontal position) max. 1An O ring is provided. (P18) Analog output Power General specifications