PA-878-203P-H-R2 Nidec Copal

PRESSURE TRANSDUCERS WITH AMP. PA-870/PA-878 INTERNAL STRUCTURE PA-870/PA-878 1 2 3 6 4 5 Part name Material FEATURES Fitting SUS 316 High corrosion resistance by Hastelloy diaphragm Stainless steel diaphragm Hastelloy C-22 SUS 316 welded stainless steel joint Built-in amplifier circuit Sensor chip Silicone Voltage or current output mode Housing SUS 316 Drip-proof cover Silicone rubber Back cover SUS 303 MODEL NUMBER DESIGNATION PA-870 - 203 P - B R2 Series name Fitting R2R 1/4 Rated pressure range PA-870 2030 ~ 2 MPa Voltage output 3530 ~ 3.5 MPa Drip-proof cover PA-878 5030 ~ 5 MPa Current output BNon-provided HProvided Pressure unit PPa pressure unit LIST OF MODEL NUMBERS Pressure reference Gauge Output Drip-proof cover Rated pressure range 0 ~ 2 0 ~ 3.5 0 ~ 5 Non-provided PA-870-203P-B-R2 PA-870-353P-B-R2 PA-870-503P-B-R2 Voltage output Provided PA-870-203P-H-R2 PA-870-353P-H-R2 PA-870-503P-H-R2 Non-provided PA-878-203P-B-R2 PA-878-353P-B-R2 PA-878-503P-B-R2 Current output Provided PA-878-203P-H-R2 PA-878-353P-H-R2 PA-878-503P-H-R2 Verify the above model numbers when placing orders. Hastelloy is a resistered trade name of Haynes International Inc.PA-870/PA-878 PRESSURE TRANSDUCERS WITH AMP. STANDARD SPECIFICATIONS Unless otherwise specified, the specs are defined at an ambient temperature of 255 C and excitation voltage of 12 V DC. PA-870 PA-878 Item Model number 203P 353P 503P 203P 353P 503P Pressure reference Gauge 1 Rated pressure range MPa 2 3.5 5 2 3.5 5 Maximum pressure MPa 4 7 10 4 7 10 Operating temp. range C 10 ~ 75 Compensated temp. range C 0 ~ 50 Operating humidity %RH 35 ~ 85No condensation Storage temp. C 20 ~ 90Atmospheric pressure, humidity 65 %RH maximum Pressure medium Corrosive gases/liquids compatible with SUS 316 and Hastelloy C-22 M Insulation resistance 100 (500 V DC) minimum Dielectric strength 350 V AC, 60 sLeakage current 0.5 mA maximum Pressure port R 1/4 Net weight g Approx. 190 Drip-proof structure Without drip-proof cover : IP54, With drip-proof cover : IP65 Supply voltage V DC 10.8 ~ 26.4 Consumption current maximum 10 mA Output voltage/current DC 1 ~ 5 V 4 ~ 20 mA Zero voltage/current 1 0.05 V 4 0.1 mA Span voltage/current 4 0.05 V 16 0.1 mA Linearity/Hysteresis %F.S. 0.5 ZERO %F.S./C 0.05 Thermal error SPAN %F.S./C 0.05 500 maximum2 Load resistance 10 k minimum At power voltage 24 V ms Response 2 maximum The transducer measures gauge pressure using an absolute pressure sensing element. Maximum load resistanceRL(Max.) = (Vopr-10.8)/0.026 Vopr = power supply voltage to be used. Analog output Power General specifications