PS40-103G-NAR Nidec Copal

PRESSURE SWITCHES PS40 INTERNAL STRUCTURE (M5 female screw) 2 1 3 4 Part name Material FEATURES Pressure port POM (Polyoxymethylene) 1 Compatible with non-corrosive gases Housing PC (Polycarbonate) 2 Solidstate pressure switch with no mechanical moving parts 2 types of pressure ports are available O ring Fluoro-rubber 3 Open collector output of either NPN or PNP is available Analog output type available Port block LCP (Liquid crystal polymer) 4 MODEL NUMBER DESIGNATION P S 4 0 - 1 0 2 G - N A R Series name Pressure port RR 1/8 male screw Rated pressure range MM 5 female screw 5010 ~ 50 kPa Outputs 1020 ~ 100 kPa A1 switch output with adjustable hysteresis 1030 ~ 1000 kPa and analog output W2 switch output Pressure reference GGauge Switch output interface VGauge (Vacuum) NNPN open collector PPNP open collector LIST OF MODEL NUMBERS 102V 501G 102G 103G Pressure port Outputs Switch output 100 kPa 50 kPa 100 kPa 1000 kPa NPN open collector output PS40-102V-NAR PS40-501G-NAR PS40-102G-NAR PS40-103G-NAR Adjustable hysteresis switch output + Analog output PNP open collector output PS40-102V-PAR PS40-102G-PAR PS40-103G-PAR R 1/8 male screw PS40-102V-NWR PS40-501G-NWR PS40-102G-NWR PS40-103G-NWR NPN open collector output 2 points switch output PNP open collector output PS40-102V-PWR PS40-102G-PWR PS40-103G-PWR NPN open collector output PS40-102V-NAM PS40-501G-NAM PS40-102G-NAM PS40-103G-NAM Adjustable hysteresis switch output + Analog output PS40-102V-PAM PS40-102G-PAM PS40-103G-PAM PNP open collector output M 5 female screw NPN open collector output PS40-102V-NWM PS40-501G-NWM PS40-102G-NWM PS40-103G-NWM 2 points switch output PNP open collector output PS40-102V-PWM PS40-102G-PWM PS40-103G-PWM : Not available Verify the above model numbers when placing orders.PS40 PRESSURE SWITCHES STANDARD SPECIFICATIONS Unless otherwise specified, the specs are defined at an ambient temperature of 255 C and excitation voltage of 12 V DC. Item Model number 102V 501G 102G 103G Pressure reference Gauge Rated pressure range kPa 100 50 100 1000 Maximum pressure kPa 200 100 200 1500 Break-down pressure kPa 500 250 500 2000 20 ~ 70 Operating temp. range C Compensated temp. range C 0 ~ 50 Operating humidity No condensation %RH 35 ~ 85 Storage temp. C 20 ~ 80 Pressure medium Non-corrosive gases M Insulation resistance 100 (500 V DC) minimum Dielectric strength 500 V AC, 60 sLeakage current 1 mA maximum R 1/8Female screwor Pressure port O ring grooveFemale screw Net weight g Approx. 50 Supply voltage V DC 10.8 ~ 30 VIncluding ripple percentage Consumption current maximum 17 mAOnly W type 25 mA maximum No. of outputs 1 or 2 Output interface Open collector output (NPN or PNP) Setting method Adjustable by VR Adjustable range Zero through rated pressure minimum Display Red LED ON (W type only : SW1 Red, SW2 Green) Accuracy (Reference temp.: 25 C) % F.S. 3 Hysteresis Approx. 1 ~ 15 % of the set value (W type only 2 % F.S. maximum) Switching capacity 30 V 80 mA V Residual voltage 0.8 (NPN), 1.2 (PNP) maximum Response ms Approx. 1 Output voltage V 1 ~ 5 Zero voltage V 1 0.1 Span voltage V 4 0.1 mA Output current 1Load resistance 5 k minimum maximum Analog output Switch output Power General specifications