NJW4182 High Voltage Ultra low current consumption Io=100mA LDO GENERAL DESCRIPTION PACKAGE OUTLINE The NJW4182 is a 100mA output Low dropout regulator with high maximum input voltage, ultra-low current consumption and small package. Due to the low current consumption, the NJW4182 is suitable for light load and continuously running applications such as NJW4182KH1 NJW4182F power management microprocessor, RTC, protection circuit, security system and so on. FEATURES NJW4182U3 Wide Operation Voltage Range 4.0 to 40V Low Current Consumption 9A (typ.) MLCC correspond Output Current I (min.)=100mA O High Precision Output Voltage V 1.0% O Internal Thermal Overload Protection Internal Over Current Protection Package Outline DFN6-H1(ESON6-H1), SOT-23-5, SOT-89-3 PIN CONFIGRATION (Top View) (Bottom View) 5 4 1. N.C. 1. N.C. 1.V 66 55 44 11 22 33 OUT 2. GND 2. GND 2.GND 3. N.C 3. N.C 3.V IN 4. V 4. V IN OUT 5. N.C 5. V 11 22 33 66 55 44 IN 1 3 1 2 3 2 Exposed Pad on backside 6. V OUT connect to GND NJW4182KH1 NJW4182F NJW4182U3 BLOCK DIAGRAM Ver.2014-09-29 - 1 - NJW4182 OUTPUT VOLTAGE RANK LIST DFN6-H1(ESON6-H1) SOT-23-5 SOT-89-3 Device Name V Device Name V Device Name V OUT OUT OUT NJW4182KH1-25 2.5V NJW4182F25 2.5V NJW4182U3-33 3.3V NJW4182KH1-33 3.3V NJW4182F33 3.3V NJW4182U3-05 5.0V NJW4182KH1-05 5.0V NJW4182F05 5.0V ABSOLUTE MAXIMUM RATINGS (Ta=25C) PARAMETER SYNBOL RATINGS UNIT Input Voltage V -0.3 to +45 V IN Output Voltage V -0.3 to V 17 V OUT IN DFN6-H1 450 (*1) (ESON6-H1) 1200 (*2) 480 (*3) Power Dissipation P SOT-23-5 mW D 650 (*4) 625(*5) SOT-89-3 2400(*6) Junction Temperature Tj -40 to +150 C Operating Temperature Topr -40 to +85 C Storage Temperature Tstg -40 to +150 C (*1): Mounted on glass epoxy board based on EIA/JEDEC STANDARD. (101.5114.51.6mm: 2Layers with Exposed Pad FR-4) (*2): Mounted on glass epoxy board based on EIA/JEDEC STANDARD. (101.5114.51.6mm: 4Layers FR-4) (4Layers inner foil: 99.599.5mm, Applying a thermal via hole to a board based on JEDEC standard JESD51-5) (*3): Mounted on glass epoxy board based on EIA/JEDEC. (114.376.21.6mm: 2Layers FR-4) (*4): Mounted on glass epoxy board based on EIA/JEDEC. (114.376.21.6mm: 4Layers FR-4), internal Cu area: 74.274.2mm 2 (*5): Mounted on glass epoxy board. (76.2 114.3 1.6mm:based on EIA/JDEC standard size, 2Layers, Cu area 100mm ) (*6): Mounted on glass epoxy board. (76.2 114.3 1.6mm:based on EIA/JDEC standard, 4Layers) (4Layers inner foil: 74.274.2mm, Applying a thermal via hole to a board based on JEDEC standard JESD51-5) OPERATION VOLTAGE RANGE V = 4.0V to 40V IN Ver.2014-09-29 - 2 -