NCV8177BMX090TCG ON Semiconductor

Linear Voltage Regulator, Fast Transient Response, 500 mA with Enable NCV8177 The NCV8177 is CMOS LDO regulator featuring 500 mA output current. The input voltage is as low as 1.6 V and the output voltage can www.onsemi.com be set from 0.75 V. It provides very stable and accurate voltage with low noise and high Power Supply Rejection Ratio (PSRR) suitable for RF applications. The NCV8177 is suitable for powering RF blocks of automotive infotainment systems and other power sensitive device. 1 1 Due to low power consumption the NCV8177 offers high efficiency XDFN4 WDFNW8 and low thermal dissipation. Small 4pin XDFN4 1.0 mm x 1.0 mm or CASE 711AJ CASE 511CL WDFNW8 2 mm x 2 mm packages make the device especially suitable for space constrained applications. Features MARKING DIAGRAMS Operating Input Voltage Range: 1.6 V to 5.5 V 1 Output Voltage Range: 0.7 V to 3.6 V XX M XX M Quiescent Current typ. 60 A 1 (XDFN4) (WDFNW8) Low Dropout: 200 mV Typ. at 500 mA, V = 1.8 V OUTNOM High Output Voltage Accuracy 0.8% XX = Specific Device Code M = Date Code Stable with Small 1 F Ceramic Capacitors = PbFree Package Overcurrent Protection (Note: Microdot may be in either location) Thermal Shutdown Protection: 175C With (NCV8177A) and Without (NCV8177B) Output Discharge Function PINOUT DIAGRAMS Available in XDFN4 1 mm x 1 mm x 0.4 mm and WDFNW8 2 mm x 2 mm Packages IN EN 43 NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements AECQ100 EPAD Qualified and PPAP Capable This is a PbFree Device Typical Applications 12 OUT GND Lights Instrument Equipment XDFN4 Cameras, Camcorders, Sensors IN IN NC EN 8 7 6 5 NCV8177 in XDFN4 VIN VOUT 4 1 IN OUT CIN COUT 1 F 1 F EPAD ON 3 EN GND 2 OFF NCV8177 in WDFNW8 VIN VOUT 8 1 12 34 IN OUT 7 2 CIN COUT OUT OUT FB GND IN OUT 1 F 1 F 6 3 WDFNW8 NC FB ON 5 EN GND 4 OFF ORDERING INFORMATION See detailed ordering, marking and shipping information on Figure 1. Typical Application Schematics page 11 of this data sheet. Semiconductor Components Industries, LLC, 2016 1 Publication Order Number: March, 2020 Rev. 10 NCV8177/DNCV8177 IN 4 1 OUT IN 4 1 OUT PROG. VOLTAGE PROG. VOLTAGE REF REF REFERENCE AND REFERENCE AND SOFTSTART SOFTSTART EN EN EN 3 EN 3 0.7 V 0.7 V THERMAL THERMAL 2 GND 2 GND SHUTDOWN SHUTDOWN NCV8177A (with output discharge) in XDFN4 NCV8177B (without output discharge) in XDFN4 IN 8 1 OUT IN 8 1 OUT PROG. VOLTAGE PROG. VOLTAGE IN 7 REF 2 OUT IN 7 REF 2 OUT REFERENCE AND REFERENCE AND SOFTSTART SOFTSTART EN EN NC NC 6 6 3 FB 3 FB EN 5 EN 5 0.7 V 0.7 V THERMAL THERMAL GND GND 4 4 SHUTDOWN SHUTDOWN NCV8177A (with output discharge) in WDFNW8 NCV8177B (without output discharge) in WDFNW8 Figure 2. Internal Block Diagram PIN FUNCTION DESCRIPTION Pin No. Pin XDFN4 WDFNW8 Name Description 1 1 OUT Regulated output voltage pin 2 OUT Regulated output voltage pin (Must be connected to pin 1) 4 8 IN Power supply input voltage pin 7 IN Power supply input voltage pin (Must be connected to pin 8) 2 4 GND Power supply ground pin 3 5 EN Enable pin (active H) 3 FB Feedback input pin (Must be connected to output voltage pin) 6 NC Not internally connected. This pin can be tied to the ground plane to improve thermal dissipation. EPAD Exposed pad should be tied to ground plane for better power dissipation www.onsemi.com 2