HP0315AFKP2 NKK Switches

Series HP03 6mm SMT Tactiles General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3VA maximum 28V DC maximum (Applicable Range 10mA ~ 125mA 0.1V ~ 28V) Logic Level (gold): 0.4VA maximum 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A 20mV ~ 28V) Note: See Supplement for further explanation of operating range. Other Ratings Contact Resistance: 100 milliohms maximum Insulation Resistance: 100 megohms minimum 100V DC Dielectric Strength: 250V AC minimum for 1 minute minimum between contacts & between contacts & case Mechanical Life: 500,000 operations minimum Electrical Life: 500,000 operations minimum Nominal Operating Force: 1.60N Total Travel: .008 (0.2mm) Materials & Finishes Actuator: Glass fiber reinforced polyamide (UL94V-0) Case: Stainless steel Base: Glass fiber reinforced polyamide (UL94V-0) Movable Contacts: Stainless steel with silver or gold plating Stationary Contacts: Brass with silver or gold plating Terminals: Brass with silver or gold plating Environmental Data J Operating Temperature Range: 20C through +70C (4F through +158F) Humidity: 90 ~ 95% humidity for 240 hours 40C (104F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute 3 right angled directions for 2 hours 2 Shock: 100G (981m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Processing Soldering: Reflow Soldering Recommended. See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL94V-0 actuator and base These switches are designed for use in a low-voltage, low-current circuit. When used as intended, the results do not produce hazardous energy. J16 www.nkkswitches.com Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Toggles6mm SMT Tactiles Series HP03 Distinctive Characteristics .244 (6.2mm) square body allows compact mounting. Heat resistant resin body meets lead-free solder processing requirements and UL flammability rating of 94V-0. Stick-tube and tape-reel packaging allow rapid automated placement of devices. Gold plated contacts available for very low voltage/current applications offer advantages of little or no oxidization or sulfurization and stable contact resistance. Gull-winged terminals ensure mechanical stability during soldering and simplified solder joint inspection. Insert molded terminals lock out flux, solvents, and other contaminants and allow automated soldering. Tape-reel packaging meets EIA-481-D Standard. J Coplanarity: all considered surfaces must lie between two parallel planes that are a maximum distance apart of .0039 (0.10mm). (Additional coplanarity details in Terms and Acronyms in the Supplement section.) Actual Size www.nkkswitches.com J17 Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Toggles