JS0208AP4-S NKK Switches

Series JS02 & JS04 Ultra-Miniature SMT DIP Slides General Specifications Electrical Capacity (Resistive Load) Switching Rating: 25mA 24V DC Nonswitching Rating: 0.1A 50V DC Other Ratings JS02 Extended Actuator JS04 Flush Actuator Contact Resistance: 50 milliohms maximum 50 milliohms maximum Insulation Resistance: 100 megohms minimum 500V DC 100 megohms minimum 100V DC Dielectric Strength: 500V AC minimum for 1 minute minimum 300V AC minimum for 1 minute minimum Mechanical Life: 2,000 operations minimum 2,000 operations minimum Electrical Life: 2,000 operations minimum 2,000 operations minimum Total Travel: .031 (0.8mm) .026 (0.65mm) Materials & Finishes JS02 Extended Actuator JS04 Flush Actuator Actuator: Glass fiber reinforced polyamide Glass fiber reinforced polyamide Cover: Glass fiber reinforced polyamide (UL94V-0) Glass fiber reinforced polyamide (UL94V -0) Base: Glass fiber reinforced polyamide (UL94V-0) Glass fiber reinforced polyamide (UL94V -0) Contacts: Beryllium copper with gold plating Copper alloy with gold plating Terminals: Brass with gold plating Brass with gold plating H Environmental Data Operating Temp Range: JS02 Extended Actuator: 25C through +70C (13F through +158F) JS04 Flush Actuator: 30C through +85C (22F through +185F) Humidity: 90 ~ 95% humidity for 96 hours 40C (104F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute 3 right angled directions for 2 hours 2 Shock: 50G (490m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) PCB Processing Soldering: Reflow Soldering Recommended. See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Note: Switches are packaged in OFF position and should be soldered in OFF position. Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL 94V-0 rated cover & base The JS Series slides have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current circuit. When used as intended in a low-voltage, low-current circuit, the results do not produce hazardous energy. H24 www.nkkswitches.com 01/05/18 Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers TogglesUltra-Miniature SMT DIP Slides Series JS02 & JS04 Distinctive Characteristics Extended and flush slide actuators available. Twin sliding contact mechanism with self-cleaning action (JS02) provides smooth actuation and produces high contact reliability. Gold plated contacts prevent oxidation and sulfide effect and provide stable contact resistance. Use of self-extinguishing UL94V-0 certified material in cover and base provides high arc resistance and high insulation resistance. Gull-wing terminals ensure secure PCB mounting and prevent dislodging during vapor phase and infrared convection reflow soldering. Terminal spacing conforms to standard PCB grid. For JS02: .100 (2.54mm) For JS04: .050 (1.27mm) H End-to-end stackable. Packaged in tape-reel or stick-tube. Tape-reel packaging meets EIA-481-D Standard. Coplanarity: all considered surfaces must lie between two parallel planes that are a maximum distance apart of .0059 (0.15mm). (Additional coplanarity details in Terms and Acronyms in the Supplement section.) Actual Sizes JS02 JS04 www.nkkswitches.com H25 Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Toggles