F72G-2GN-AL3 Norgren

F72G, F72C EXCELON 72 Filter Combination Units 1/4 and 3/8 Port Sizes l True modularity with Norgren Quikclamp connections l F72G prefilter and F72C oil removal filter provide high efficiency oil removal and particle removal down to 0.01 m l Quick release bayonet bowl l Highly visible, prismatic liquid level indicator lens l Service indicator turns from green to red when the filter element needs to be replaced Technical Data Fluid: Compressed air Maximum pressure: Transparent bowl: Manual or semi automatic drain: 10 bar (150 psig) Materials: Automatic drain: 8 bar (116 psig) Body: Zinc Metal bowl: Bowl: Manual or semi automatic drain: 17 bar (250 psig) Transparent: Polycarbonate Automatic drain: 8 bar (116 psig) Transparent with guard: Polycarbonate, Operating temperature*: zinc guard Transparent bowl: -20 to +50C (0 to +125F) Metal: Zinc Metal bowl: -20 to +65C (0 to +150F) Metal bowl liquid level indicator lens: * Air supply must be dry enough to avoid ice formation at temperatures below +2C Transparent nylon (+35F). F72G element: Sintered polypropylene Particle removal: Down to 0,01 m F72C element: Synthetic fibre and Air quality: Within ISO 8573-1, Class 1 (particulates) and Class 2 (oil polyurethane foam content) Elastomers: Neoprene and nitrile Maximum remaining oil content in outlet air: 0,01 ppm at +20C (+70F) Service indicator materials: with an inlet concentration of 17 ppm Body: Transparent nylon Maximum flow at 6,3 bar (90 psig) inlet pressure to maintain stated oil Internal parts: Acetal 3 removal performance: 4,5 dm /s (9.5 scfm) Spring: Stainless steel Manual drain connection: 1/8 Elastomers: Nitrile Semi automatic drain connection: Push on 8 mm (5/16 ) ID tube Semi automatic drain operating conditions (pressure operated): Ordering Information Bowl pressure required to close drain: Greater than 0,1 bar (1.5 psig) See Ordering Information on the following pages. Bowl pressure required to open drain: Less than 0,1 bar (1.5 psig) 3 Minimum air flow required to close drain: 0,5 dm /s (1 scfm) Manual operation: Lift stem to drain bowl Automatic drain connection: 1/8 Automatic drain operating conditions (float operated): ISO Symbols Bowl pressure required to close drain: Greater than 0,3 bar (5 psig) Bowl pressure required to open drain: Less than 0,2 bar (3 psig) 3 Minimum air flow required to close drain: 0,1 dm /s (0.2 scfm) Manual operation: Depress pin inside drain outlet to drain bowl Nominal bowl size: Short bowl: 56 ml (1.9 fluid ounce) Automatic and Manual Drain Long bowl: 65 ml (2.2 fluid ounce) Semi Automatic Drain Our policy is one of continuous research and development. 4/98 N/AL.8.160.800.01 We reserve the right to amend, without notice, the specifications given in this document. EXCELON 72 Filter Combination Units Ordering information. Models listed include ISO G parallel threads, service indicator, semi automatic drain, and short transparent bowl without guard on both filters. 3 Port Size Model Flow* dm /s (scfm) Weight kg (lb) G1/4 H72A-2GB-ST1-NNN-TNN 4,5 (9.5) 0,91 (2) G3/8 H72A-3GB-ST1-NNN-TNN 4,5 (9.5) 0,91 (2) * Maximum flow with 6,3 bar (90 psig) inlet pressure to maintain stated oil removal performance. Alternative Models H H H H H H H H H 7 2 A N N N N - - - - Shutoff/Lockout Valve, Quikmount Substitute Quikclamp Wall Brackets Substitute Standard Combination (No H With B Shutoff/Lockout Valve, Without N no Quikmount) Adsorbing Filter Bowl Substitute With Shutoff/Lockout valve on inlet J No Adsorbing filter N With Quikmount pipe adapters M on inlet and outlet F72C Bowl Substitute With Shutoff/Lockout Valve on inlet N Short metal with liquid level indicator D and Quikmount pipe adapter on Short transparent without guard T outlet Long transparent without guard L Long transparent with guard W Combination Unit Type Substitute F72G general purpose filter and A F72C coalescing filter Regulator Option Substitute Non Applicable N Regulator Option Substitute Non Applicable N Regulator Option Substitute Non Applicable N Port Size Substitute 1/4 2 F72G Filter Element Substitute 3/8 3 5 m 1 Threads Substitute F72G Bowl Substitute PTF A Short metal with liquid level indicator D ISO Rc taper B Short transparent without guard T ISO G parallel G Long transparent without guard L Long transparent with guard W Mechanical Service Indicator Substitute Indictor on F72G and F72C B F72G and F72C Drain Substitute Indictor only on F72C C Automatic** A Indictor only on F72G D Manual, 14 turn Q No indicator N Semi automatic S ** Supplied in long bowl options only. Accessories. See page N/AL.8.160.700. Our policy is one of continuous research and development. N/AL.8.160.800.02 4/98 We reserve the right to amend, without notice, the specifications given in this document.