M/S & C/S series Porous plastic silencers G1/8A to G1A, NPT Reduce the noise levels of pneumatic equipment Compact, efficient and lightweight Screw directly into the exhaust port Prevent the ingress of dirt Technical data Ordering Information Medium: See page 2 Compressed air, filtered 50 m, lubricated and non lubricated/vacuum, inert gases Alternative Models Operation: T40 series of Quietaire sintered bronze Exhaust silencer/vacuum filter silencers, see page N/UK 10.5.021.01 Operating pressure: Quietaire range of heavy duty models, -1 to +10 bar maximum (vacuum service) see page N/UK 10.5.031.01 Operating temperature: T45 series of porous plastic silencer for -20C to +80C PUSH-IN fittings see page N/UK 10.5.012.01 (please contact our Technical Service for use below 2C) Mounting: Directly in the exhaust port Port sizes: Metric Type BSPP Type NPT Type M5 M/S0 G1/8A M/S1 1/8 NPT C/S1 G1/4A M/S2 1/4 NPT C/S2 G3/8A M/S3 3/8 NPT C/S3 G1/2A M/S4 1/2 NPT C/S4 G3/4A M/S6 3/4 NPT C/S6 G1A M/S8 1 NPT C/S8 Materials: Body: UHMW polyethylene porous plastic Connector base: polyethylene 2/07 Our policy is one of continued research and development. We therefore reserve the right to amend, N/UK 10.5.011.01 without notice, the specifications given in this document.M/S & C/S series General informationen Max. Continuous sound pressure level flow factor (dBA) *3) Type Port size Type Port size Type Port size C *1) Cv *2) 0,7 bar 6 bar M/S0 M5 1,3 0,31 59 84 M/S1 G1/8A C/S1 1/8 NPT 7,1 1,74 67 85 M/S2 G1/4A C/S2 1/4 NPT 5,9 1,44 58 74 M/S3 G3/8A C/S3 3/8 NPT 15,3 3,75 65 79 M/S4 G1/2A C/S4 1/2 NPT 12,2 3,00 59 73 M/S6 G3/4A C/S6 3/4 NPT 31,0 7,79 71 89 M/S8 G1A C/S8 1 NPT 39,3 9,63 70 82 3 *1) C measured in dm /(s.bar) *2) Cv measured in US gall/min *3) D SPL at 1 m from unit Ordering example To order, quote model number from the table overleaf, e.g. M/S3 for the G3/8A model. Dimensions D A Model Size B F D Weight (g) M/S0 M5 4,5 19 6,5 0,35 M/S1, C/S1 1/8 inch 5,5 28,5 12,5 1,80 M/S2, C/S2 1/4 inch 7 35,5 15,5 2,90 M/S3, C/S3 3/8 inch 11,5 56 18,5 6,70 M/S4, C/S4 1/2 inch 12 67 23 11,50 M/S6, C/S6 3/4 inch 15,5 123,5 38 40,00 M/S8, C/S8 1 inch 19,5 140,5 49 60,00 Warning These products are intended for use in industrial compressed air The system designer is warned to consider the failure modes of systems only. Do not use these products where pressures and all component parts used in fluid power systems and to provide temperatures can exceed those listed under Technical Data. adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. Before using these products with fluids other than those specified, System designers must provide a warning to end users in for non-industrial applications, life-support systems, or other the system instructional manual if protection against a failure applications not within published specifications, consult NORGREN. mode cannot be adequately provided. System designers and end users are cautioned to review specific Through misuse, age, or malfunction, components used in warnings found in instruction sheets packed and shipped with fluid power systems can fail in various modes. these products. 2/07 Our policy is one of continued research and development. We therefore reserve the right to amend, N/UK 10.5.011.02 without notice, the specifications given in this document. B F