PRODUCT DATASHEET SynJet Spotlight Cooler 60W SynJet cooling technology provides the most reliable thermal management solution available. This LED cooler has been developed by Nuventix for cooling downlight and spotlight modules and arrays. 4 Cools up to 60 W 5 Yr Warranty Reliable 100K Hours Lifetime Small Form Factor Energy Efficient Quiet Acoustics 1 Specifications Thermal & Acoustic 3 4 SPL 2 s-a TDP (W) SynJet Setting 5 Wire Connections Cu / Al Cu / Al (dBA) Red to +VDC Mid Performance 0.55 / 0.60 55 / 50 25 Black & Blue to Ground Red to +VDC Standard Performance 0.60 / 0.65 50 / 46 22 Black only to Ground Red to +VDC Silent Performance 0.70 / 0.75 43 / 40 19 Black & Purple to Ground Red to +VDC PWM at 100% duty cycle 0.50 / 0.55 60 / 55 28 Black only to Ground Blue to PWM Signal Heatsink Only 1.50 / 1.55 20 / 19 N/A N/A N/A Electrical 6 6 Current (mA) Current (mA) Voltage Voltage 2 SynJet Setting (VDC) Pavg (VDC) Pavg +/- 10% Imin Iavg Ipeak (mW) +/- 10% Imin Iavg Ipeak (mW) Mid 120 240 600 67 134 800 Standard 80 160 400 50 100 600 5 20 12 10 Silent 60 120 300 40 80 480 PWM at 100% duty cycle 160 320 800 82 164 980 Environmental All Settings Min Max Units Conditions Operating Temperature -40 70 Air temperature surrounding cooler C Storage Temperature -50 95 C Air temperature surrounding cooler Storage Altitude 15K m Above sea level Operating Relative Humidity 5 95 % Non-condensing Weight 600 g SynJet with Al heat sink and Cu mounting plate Reliability 100K hrs L10 60C Regulatory Compliance RoHS, UL, FCC Part 15 Class B, CE 1 All values are typical at 25C unless otherwise stated. 2 The Level Select model should be used for discrete performance settings. Follow the instructions in the Product Design Guide for adjusting settings. 3 Thermal resistance values are given as reference only and are measured in free air without airflow obstructions. Thermal resistance is measured from the bottom 2 middle of the heat sink to ambient air measured at the inlet to the SynJet, with a heat source at least 15cm using the 60 W reference heat sink. Actual thermal performance may vary by application and final product design should be tested to assure proper thermal performance. 4 Thermal Design Power is based on a 30C temperature rise of heat sink mounting surface above ambient temperature around cooler. 5 Sound Pressure Level is measured at 1 meter distance per ISO 7779. 6 The SynJet has a time varying current. The current waveform is sinusoidal and the average current (Iavg) is used to calculate the average power consumption (Pavg) at nominal input voltage (VDC). See the Electrical section in the Product Design Guide for a detailed explanation. 4635 Boston Lane Phone: 512-382-8100 MKTG-DOC-000104 A01 Austin, TX 78735 www.nuventix.com Revision Aug 2012 PRODUCT DATASHEET Mechanical - SynJet Cooling Solution shown with Al Configurable heat sink All dimensions are nominal and in mm unless otherwise stated. See product drawings for more detail. SynJet Wire Harness Connector Pinout Pin Wire Color Symbol Description 1 Red +VDC 5 V or 12 V depending on model 2 Black GND Ground Input for Level Select model 3 Purple CTRL2 Status signal for PWM model Input for Level Select model 4 Blue CTRL1 PWM input for PWM model IMPORTANT: SynJets should be completely wired to the power supply before the power supply is energized. The power supply should be turned off before the SynJet Cooler is disconnected. SynJet Coolers are not designed for hot swap or hot plug applications. Part Numbers Part Number Description Notes NX200100 SynJet, ZFlow 90, Level Select, 5V, Black Configurable to discrete performance settings Use with PWM input to control performance setting NX200101 SynJet, ZFlow 90, PWM, 5V, Black Configurable to discrete performance settings NX200102 SynJet, ZFlow 90, Level Select, 12V, Black NX200103 SynJet, ZFlow 90, PWM, 12V, Black Use with PWM input to control performance setting NX300100 Heatsink, 60W, Configurable, Black, Al insert Contact sales for other heatsink options NX300101 Heatsink, 60W, Philips SLM, Vossloh-Schwabe, Black, Al insert Contact sales for other heatsink options NX300102 Heatsink, 60W, Osram PrevaLed, Black, Al insert Contact sales for other heatsink options NX300103 Heatsink, 60W, BridgeLux RS, Black, Al insert Contact sales for other heatsink options NX300104 Heatsink, 60W, Philips SLM, Vossloh-Schwabe, Black, Cu insert Contact sales for other heatsink options NX300105 Heatsink, 60W, Spotlight Cooler, Zhaga B3, Tridonic, Al, Black Contact sales for other heatsink options NX300128 Heatsink, 60W, Spotlight Cooler, Xicato, Al, Black Contact sales for other heatsink options WALLS-C4150-001 Wire Harness, 4-Wire, 150 mm Length Contact sales for other wire harness options WALLS-C4600-001 Wire Harness, 4-Wire, 600 mm Length Contact sales for other wire harness options Nuventix reserves the right to make changes to the products or information contained herein without notice. No liability is assumed as a result of their use or applications. For additional information, please contact Nuventix directly. 4635 Boston Lane Phone: 512-382-8100 MKTG-DOC-000104 A01 Austin, TX 78735 www.nuventix.com Revision Aug 2012