Free-Stand Cabinet S Net Serie S CommuN iC atioN a Nd Server Cabi Net S a Nd aCC e SSorie S Spec-00194 n et Serie S CommuniC ation and Server Cabinet Rack angle settings on all 700- and 800-mm wide cabinets can accommodate either 19- or 23-in. rack spacing In 600-mm wide cabinets, equipment mounted on 19-in. rack angles is centered In 700- and 800-mm wide cabinets, 19-in. rack angles can be set to center equipment or to mount equipment next to the left or the right side for improved cable management R ack angles infinitely positionable within the cabinet for easy adjustment to desired position All doors are field removable and reversible with left or right hinging for installation flexibility C ommunication cabinet has fully perforated or window front and louvered rear doors for equipment ventilation Server cabinet has fully perforated front and split rear perforated doors for easy access to servers D oors have key-locking handles that provide security with convenient access for authorized personnel Removable side panels with quarter-turn key-locking latch are inset for flush appearance Two cable entry ports with caps and grommets on cabinet top for wiring ease Fan-ready top with integral finger guard. Order up to two 6-in. fans separately. Caster- and leveler-ready open base design. Order casters and levelers separately. SPeCiFiCation S Some models available with or without sides Welded multi-formed steel frame. The top and columns are 16 gauge base is 14 gauge. Multi-formed rigid doors are 14 gauge steel Window made of 1/8-in. smoke-tinted acrylic Formed solid sides are 14 gauge steel R ack angles are 12 gauge steel Ground studs provided on doors and covers Fini SH indu Str Y Standard S Pretreated steel coated with RAL 9005 black textured low-gloss UL 2416 Listed (perforated, split perforated and louvered door polyester powder paint. Other finishes availablecontact Hoffman models only) Customer Service. EIA 310-D Load rating IEC 60529, IP20 1000 lb. (454 kg) per UL 2416 with load evenly distributed in Perforated door material meets equipment manufacturer enclosure ventilation requirements note : uL 2416 requires that the cabinet be tested with a load four times the rating. Contact Hoffman if other loading specifications a PPLiCation are required. Net Series Cabinets are an economical solution for contractors, a CCeSSorieS small computer rooms, schools or smaller networks that require Net Series Rack Angles a general-purpose cabinet to house servers and communication Net Series Caster Kit equipment. Multiple sizes, adjustable rack angles and accessories Net Series Leveler Kit give Net Series Cabinets wide application flexibility. Net Series Joining Kit Net Series Tool-less (Snap-in) Blanking Panels for 19-in. Racks Feature S Net Series Vertical Tie-Down Cable Manager I ncludes two sets of adjustable L-shaped rack angles for Net Series Tool-less Shelf convenient equipment mounting Rack angles on communication cabinets have tapped 10-32 holes Bulletin: D c per EIA standards. Order 10-32 fasteners separately. Rack angles on server cabinets have square holes per EIA standards. Order fasteners and cage nuts separately. 1 n etworking SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Spec-00194 MFree-Stand Cabinet S Net Serie S CommuN iC atioN a Nd Server Cabi Net S a Nd aCC e SSorie S Standard Product M N Catalog Number AxBxC in./mm Description Rack Units in./mm in./mm Rack Angle Holes Additional Rack Angles NC1268 49.00 x 23.62 x 33.99 Communication Cabinet 23 42.00 14.71 Tapped 10-32 NRAT126 1245 x 600 x 863 1067 374 NC2178 84.00 x 27.56 x 33.99 Communication Cabinet 43 77.00 18.65 Tapped 10-32 NRAT217 2134 x 700 x 863 1956 474 NC2178NS 84.00 x 27.56 x 33.98 Communication Cabinet 43 77.00 18.65 Tapped 10-32 NRAT217 2134 x 700 x 863 No Sides 1956 474 NC2179 84.00 x 27.56 x 37.93 Communication Cabinet 43 77.00 18.65 Tapped 10-32 NRAT217 2134 x 700 x 963 1956 474 NC21710 84.00 x 27.56 x 41.86 Communication Cabinet 43 77.00 18.65 Tapped 10-32 NRAT217 2134 x 700 x 1063 1956 474 NC2188 84.00 x 31.50 x 33.99 Communication Cabinet 43 77.00 22.58 Tapped 10-32 NRAT218 2134 x 800 x 863 1956 574 NC2189 84.00 x 31.50 x 37.93 Communication Cabinet 43 77.00 22.58 Tapped 10-32 NRAT218 2134 x 800 x 963 1956 574 NC21810 84.00 x 31.50 x 41.86 Communication Cabinet 43 77.00 22.58 Tapped 10-32 NRAT218 2134 x 800 x 1063 1956 574 NCW2168 84.00 x 23.62 x 33.99 Communication Cabinet, Window Door 43 77.00 14.71 Tapped 10-32 NRAT216 2134 x 600 x 863 1956 374 NCW2168NS 84.00 x 23.62 x 33.98 Communication Cabinet, Window Door 43 77.00 14.71 Tapped 10-32 NRAT216 2134 x 600 x 863 No Sides 1956 374 NCW2178 82.68 x 27.56 x 31.50 Communication Cabinet, Window Door 43 77.00 18.65 Tapped 10-32 NRAT217 2100 x 700 x 800 1956 474 NCW2178NS 84.00 x 27.56 x 33.98 Communication Cabinet, Window Door 43 77.00 18.65 Tapped 10-32 NRAT217 2134 x 700 x 863 No Sides 1956 474 NCW2188 82.68 x 31.50 x 31.50 Communication Cabinet, Window Door 43 77.00 22.58 Tapped 10-32 NRAT218 2100 x 800 x 800 1956 574 NS12610 49.00 x 23.62 x 41.86 Server Cabinet 23 42.00 14.71 Square NRAS126 1245 x 600 x 1063 1067 374 NS2169 84.00 x 23.62 x 37.93 Server Cabinet 43 77.00 14.71 Square NRAS216 2134 x 600 x 963 1956 374 NS2169NS 84.00 x 23.62 x 37.91 Server Cabinet 43 77.00 14.71 Square NRAS216 2134 x 600 x 963 No Sides 1956 374 NS21610 84.00 x 23.62 x 41.86 Server Cabinet 43 77.00 14.71 Square NRAS216 2134 x 600 x 1063 1956 374 NS21610NS 84.00 x 23.62 x 41.85 Server Cabinet 43 77.00 14.71 Square NRAS216 2134 x 600 x 1063 No Sides 1956 374 NS21611 84.00 x 23.62 x 45.80 Server Cabinet 43 77.00 14.71 Square NRAS216 2134 x 600 x 1163 1956 374 NS21612 84.00 x 23.62 x 49.74 Server Cabinet 43 77.00 14.71 Square NRAS216 2134 x 600 x 1263 1956 374 NS21711 84.00 x 27.56 x 45.80 Server Cabinet 43 77.00 18.65 Square NRAS217 2134 x 700 x 1163 1956 474 NS21811 84.00 x 31.50 x 45.80 Server Cabinet 43 77.00 22.58 Square NRAS218 2134 x 800 x 1163 1956 574 Tapped and square hole rack angles of the same size can be used interchangeably in communication and server cabinets. See rack angle table for available rack angles. Catalog numbers with NS at the end have no sides. EQUIPMENT PROTECTION P H 76 3 . 4 2 2 . 2 6 61 F A X 76 3 . 4 2 2 . 2 5 8 8 P e n tA i r P r o t e c t. c o m n etworking 2 Spec-00194 M