74HCT4053N NXP

74HC4053 74HCT4053 Triple 2-channel analog multiplexer/demultiplexer Rev. 8 19 July 2012 Product data sheet 1. General description The 74HC4053 74HCT4053 is a high-speed Si-gate CMOS device and is pin compatible with the HEF4053B. It is specified in compliance with JEDEC standard no. 7A. The 74HC4053 74HCT4053 is triple 2-channel analog multiplexer/demultiplexer with a common enable input (E). Each multiplexer/demultiplexer has two independent inputs/outputs (nY0 and nY1), a common input/output (nZ) and three digital select inputs (Sn). With E LOW, one of the two switches is selected (low-impedance ON-state) by S1 to S3. With E HIGH, all switches are in the high-impedance OFF-state, independent of S1 to S3. V and GND are the supply voltage pins for the digital control inputs (S0 to S2, and E). CC The V to GND ranges are 2.0 V to 10.0 V for 74HC4053 and 4.5 V to 5.5 V for CC 74HCT4053. The analog inputs/outputs (nY0 to nY1, and nZ) can swing between V as CC a positive limit and V as a negative limit. V V may not exceed 10.0 V. EE CC EE For operation as a digital multiplexer/demultiplexer, V is connected to GND (typically EE ground). 2. Features and benefits Wide analog input voltage range from 5 V to +5 V Low ON resistance: 80 (typical) at V V =4.5 V CC EE 70 (typical) at V V =6.0 V CC EE 60 (typical) at V V =9.0 V CC EE Logic level translation: to enable 5 V logic to communicate with 5 V analog signals Typical break before make built-in ESD protection: HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V CDM JESD22-C101E exceeds 1000 V Multiple package options Specified from 40 Cto +85 C and 40 Cto +125 C74HC4053 74HCT4053 NXP Semiconductors Triple 2-channel analog multiplexer/demultiplexer 3. Applications Analog multiplexing and demultiplexing Digital multiplexing and demultiplexing Signal gating 4. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74HC4053N 40 C to +125 C DIP16 plastic dual in-line package 16 leads (300 mil) SOT38-4 74HCT4053N 74HC4053D 40 C to +125 C SO16 plastic small outline package 16 leads SOT109-1 body width 3.9 mm 74HCT4053D 74HC4053DB 40 C to +125 C SSOP16 plastic shrink small outline package 16 leads SOT338-1 body width 5.3 mm 74HCT4053DB 74HC4053PW 40 C to +125 C TSSOP16 plastic thin shrink small outline package 16 leads SOT403-1 body width 4.4 mm 74HCT4053PW 74HC4053BQ 40 C to +125 C DHVQFN16 plastic dual in-line compatible thermal enhanced very SOT763-1 thin quad flat package no leads 16 terminals 74HCT4053BQ body 2.5 3.5 0.85 mm 74HC HCT4053 All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product data sheet Rev. 8 19 July 2012 2 of 32