INTEGRATED CIRCUITS
DATA SHEET
For a complete data sheet, please also download:
The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
74HC/HCT4353
Triple 2-channel analog
multiplexer/demultiplexer with latch
December 1990
Product specication
File under Integrated Circuits, IC06Philips Semiconductors Product specication
Triple 2-channel analog
74HC/HCT4353
multiplexer/demultiplexer with latch
FEATURES multiplexer has two independent inputs/outputs (nY and
0
nY ), a common input/output (nZ) and select inputs (S to
1 1
Wide analog input voltage range: 5 V
S ).
3
Low ON resistance:
Each multiplexer/demultiplexer contains two bidirectional
80 (typ.) at V - V = 4.5 V
CC EE
analog switches, each with one side connected to an
70 (typ.) at V - V = 6.0 V
CC EE
independent input/output (nY and nY ) and the other side
0 1
60 (typ.) at V - V = 9.0 V
CC EE
connected to a common input/output (nZ).
Logic level translation:
With E LOW and E HIGH, one of the two switches is
to enable 5 V logic to communicate with 5 V analog 1 2
selected (low impedance ON-state) by S to S .
1 3
signals
The data at the select inputs may be latched by using the
Typical break before make built in
active LOW latch enable input (LE). When LE is HIGH, the
Address latches provided
latch is transparent. When either of the two enable inputs,
E (active LOW) and E (active HIGH), is inactive, all
Output capability: non-standard
1 2
analog switches are turned off.
I category: MSI
CC
V and GND are the supply voltage pins for the digital
CC
control inputs (S to S , LE, E and E ). The V to GND
1 3 1 2 CC
GENERAL DESCRIPTION
ranges are 2.0 to 10.0 V for HC and 4.5 to 5.5 V for HCT.
The 74HC/HCT4353 are high-speed Si-gate CMOS
The analog inputs/outputs (nY and nY , and nZ) can
0 1
devices. They are specified in compliance with JEDEC
swing between V as a positive limit and V as a
CC EE
standard no. 7A.
negative limit. V - V may not exceed 10.0 V.
CC EE
The 74HC/HCT4353 are triple 2-channel analog
For operation as a digital multiplexer/demultiplexer, V is
EE
multiplexers/demultiplexers with two common enable
connected to GND (typically ground).
inputs (E and E ) and a latch enable input (LE). Each
1 2
QUICK REFERENCE DATA
V = GND = 0 V; T = 25 C; t = t = 6 ns
EE amb r f
TYPICAL
SYMBOL PARAMETER CONDITIONS UNIT
HC HCT
t / t turn ON time E ,E or S to V C = 50 pF; R =1 k; 29 21 ns
PZH PZL 1 2 n os L L
V = 5 V
CC
t / t turn OFF time E ,E or S to V 20 22 ns
PHZ PLZ 1 2 n os
C input capacitance 3.5 3.5 pF
I
C power dissipation capacitance per switch notes 1 and 2 23 23 pF
PD
C max. switch capacitance
S
independent (Y) 5 5 pF
common (Z) 8 8 pF
2
Notes {(C C ) V f } = sum of outputs
L S CC o
1. C is used to determine the dynamic power V = supply voltage in V
PD CC
dissipation (P in W):
D
2. For HC the condition is V = GND to V
I CC
P = For HCT the condition is V = GND to V - 1.5 V
D I CC
2 2
C V f + {(C +C ) V f } where:
PD CC i L S CC o
f = input frequency in MHz
i
ORDERING INFORMATION
C = output load capacitance in pF
L
See 74HC/HCT/HCU/HCMOS Logic Package
f = output frequency in MHz
o Information.
C = max. switch capacitance in pF
S
December 1990 2