ASL1500SHNY NXP

ASL1500SHN Single phase boost converter Rev. 4 26 October 2017 Product data sheet 1. Introduction The ASL1500SHN is a highly integrated and flexible single phase DC-to-DC boost converter IC. It has an SPI interface allowing control and diagnostic communication with an external microcontroller. It is designed primarily for use in automotive LED lighting applications and provides an optimized supply voltage for ASLx415SHN Multi-channel LED Buck Driver. 2. General description The ASL1500SHN has a fixed frequency peak current mode control with parabolic/non-linear slope compensation. It can operate with input voltages from 5.5 V to 40 V. It can be configured via SPI for output voltages of up to 80 V, to power the LED buck driver IC. The ASL1500SHN boost converter drives one external low-side N channel MOSFET from an internally regulated adjustable supply to drive either logic or standard level MOSFET. The integrated SPI interface also allows for programming the supply under/over voltage range, output voltage range and DC-to-DC switching frequency. It enables the optimization of external components and flexibility for EMC design. This interface can also be used to provide diagnostic information such as the driver temperature. Additional features include input under-voltage lockout and thermal shutdown when the junction temperature of the ASL1500SHN exceeds +175 C. The device is housed in a very small HVQFN32 pin package with an exposed thermal pad. It is designed to meet the stringent requirements of automotive applications. It is fully AEC Q100 grade 1 qualified. It operates over the 40 C to +125 C ambient automotive temperature range.ASL1500SHN NXP Semiconductors Single phase boost converter 3. Features and benefits The ASL1500SHN is an automotive grade product that is AEC-Q100 grade 1 qualified. Operating ambient temperature range of 40 C to +125 C Wide operating input voltage range from +5.5 V to +40 V Output voltage programmable via SPI interface Flexible output voltage with 3 % accuracy programmable via SPI Fixed Frequency Operation via built-in oscillator Slope compensation to track the frequency and output voltage Programmable control loop compensation Fast high efficiency FET switching Programmable internal gate driver voltage regulator Gate switching is halted when overvoltage on output is detected Support both Logic Level and Standard Level FETs Low Electro Magnetic Emission (EME) and high Electro Magnetic Immunity (EMI) Output voltage monitoring Supply voltage measurement Control signal to enable the device Read-back programmed voltage and frequency range via SPI Junction temperature monitoring via SPI Small package outline HVQFN32 Low quiescent current <5 A at 25 C when EN = 0 4. Applications Automotive LED lighting Daytime running lights Position or park light Low beam High beam Turn indicator Fog light Cornering light 5. Ordering information Table 1. Ordering information Type number Package Name Description Version ASL1500SHN HVQFN32 plastic thermal enhanced very thin quad flat package no leads 32 terminals SOT617-12 body 5 5 0.85 mm ASL1500SHN All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2017. All rights reserved. Product data sheet Rev. 4 26 October 2017 2 of 36