JN5179-001-M10Z NXP

JN5179-001-M1x ZigBee 3.0, ZigBee PRO, Thread and IEEE802.15.4 modules Rev. 2.0 26 October 2016 Product data sheet 1. General description The JN5179-001-M1x (with x = 0, 3 or 6) module family provides designers with a ready-made component that provides a fully integrated solution for applications, using the IEEE802.15.4 standard in the 2.4 GHz - 2.5 GHz ISM frequency band, including ZigBee Smart Energy and Home Automation and can be quickly and easily included in product designs. The modules integrate all of the RF components required, removing the need to perform expensive RF design and test. Products can be designed by simply connecting sensors and switches to the module IO pins. The modules use NXPs single chip IEEE802.15.4 wireless microcontroller, allowing designers to make use of the extensive chip development support material. Hence, this range of modules allows designers to bring wireless applications to market in the minimum time with significantly reduced development effort and cost. 3 variants are available: JN5179-001-M10, JN5179-001-M13 and JN5179-001-M16. All modules have FCC modular approval. The JN5179-001-M10 and JN5179-001-M13 are also CE-compliant and subject to a Notified Body Opinion. The variants available are described in the Table 1. 1.1 Regulatory Approvals The JN5179-001-M10 and JN5179-001-M13 have been tested against the requirements of the following European standards. Radio EN 300 328 v 1.9.1 EMC, EN 301 489-17 v 2.2.1, EN 62479 2010, EN 301 489-1 v 1.9.2 Basic Safety Assessment (BSA) EN 60950-1:2006 A Notified Body statement of opinion for this standard is available on request. The High-power module with M16 suffix is not approved for use in Europe. Additionally, both module types have received FCC Modular Approval, in compliance with CFR 47 FCC part 15 regulations and in accordance to FCC public notice DA00-1407. The modular approvals notice and test reports are available on request. The JN5179-001-M16 module is subject to user proximity restrictions under FCC regulations more specific information is available in Section 13.1.2.JN5179-001-M1x NXP Semiconductors ZigBee 3.0, ZigBee PRO, Thread and IEEE802.15.4 modules 2. Features and benefits 2.1 Benefits Microminiature module solutions Ready to use in products Minimizes product development time No RF test required for systems Compliant with: FCC 47CFR Part 15C ETSI EN 300 328 V1.9 EN 301-489-17 V2.2.1 EN60950-1-2006 Temperature range: 40 C to +85 C Lead-free and RoHS compliant 2.2 Features: modules 2.4 GHz IEEE 802.15.4, ZigBee Smart Energy and Home Automation compatible JN5179-001-M10 Dimensions: 14.5 mm 20.5 mm Integrated printed antenna TX power 8.5 dBm/10 dBm Receiver sensitivity 96 dBm TX current 24 mA at 10 dBm TX current 21.2 mA at 8.5 dBm RX current 14.3 mA at maximum input level 2 dBm 2.0 V/3.6 V operation JN5179-001-M13 Dimensions: 14.5 mm 20.5 mm Fl connector TX power 8.5 dBm/10 dBm Receiver sensitivity 96 dBm TX current 24 mA at 10 dBm TX current 21.2 mA at 8.5 dBm RX current 14.3 mA at maximum input level 2 dBm 2.0 V/3.6 V operation JN5179-001-M16 Dimensions: 14.5 mm 20.5 mm Integrated printed antenna and Fl connector Antenna diversity TX power 21 dBm Receiver sensitivity 100 dBm TX current 114 mA at 21 dBm RX current 19 mA at maximum input level 11 dBm JN5179-001-M1x All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2016. All rights reserved. Product data sheet Rev. 2.0 26 October 2016 2 of 28