PRoC BLE: CYBL1XX7X Family Datasheet Programmable Radio-on-Chip With Bluetooth Low Energy General Description PRoC BLE is a 32-bit, 48-MHz ARM Cortex -M0 BLE solution with CapSense , 12-bit ADC, four timer, counter, pulse-width 2 modulators (TCPWM), Direct memory access (DMA), thirty-six GPIOs, two serial communication blocks (SCBs), LCD, and I S. PRoC BLE includes a royalty-free BLE stack compatible with Bluetooth 4.2 and provides a complete, programmable, and flexible solution for HID, remote controls, toys, beacons, and wireless chargers. In addition to these applications, PRoC BLE provides a simple, low-cost way to add BLE connectivity to any system. Features 2 Two serial communication blocks (SCBs) supporting I C Bluetooth Smart Connectivity (Master/Slave), SPI (Master/Slave), or UART Bluetooth 4.2 single-mode device Four dedicated 16-bit TCPWMs 2.4-GHz BLE radio and baseband with integrated balun Additional four 8-bit or two 16-bit PWMs TX output power: 18 dBm to +3 dBm Programmable LVD from 1.8 V to 4.5 V Received signal strength indicator (RSSI) with 1-dB resolution 2 I S Master interface RX sensitivity: 92 dBm Clock, Reset, and Supply TX current: 15.6 mA at 0 dBm Wide supply-voltage range: 1.9 V to 5.5 V RX current: 16.4 mA 3-MHz to 48-MHz internal main oscillator (IMO) with 2% ARM Cortex-M0 CPU Core accuracy 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit 24-MHz external clock oscillator (ECO) without load multiply, operating at up to 48 MHz capacitance 256-KB flash memory 32-kHz WCO 32-KB SRAM memory Programmable GPIOs Emulated EEPROM using flash memory 36 GPIOs configurable as open drain high/low, Watchdog timer with dedicated internal low-speed oscillator pull-up/pull-down, HI-Z, or strong output (ILO) Any GPIO pin can be CapSense, LCD, or analog, with flexible Eight-channel direct memory access (DMA) controller pin routing Ultra-Low-Power Programming and Debug 1.5-A Deep-Sleep mode with watch crystal oscillator (WCO) 2-pin SWD on In-system flash programming support 150-nA Hibernate mode current with SRAM retention Temperature and Packaging 60-nA Stop mode current with GPIO wakeup Operating temperature range: 40 C to +105 C CapSense Touch Sensing with Two-Finger Gestures Available in 56-pin QFN (7 mm 7 mm) and 76-ball WLCSP Up to 36 capacitive sensors for buttons, sliders, and touchpads (3.52 mm 3.91 mm) packages One-finger gestures: finger tracking, scroll, inertial scroll, PSoC Creator Design Environment edge-swipe, click, double-click Easy-to-use IDE to configure, develop, program, and test a Two-finger gestures: scroll, inertial scroll, zoom-in, zoom-out BLE application Cypress Capacitive Sigma-Delta (CSD) provides best-in-class Option to export the design to Keil, IAR, or Eclipse SNR (> 5:1) and liquid tolerance Automatic hardware-tuning algorithm (SmartSense) Bluetooth Low Energy Protocol Stack Bluetooth Low Energy protocol stack supporting generic Peripherals access profile (GAP) Central, Peripheral, Observer, or 12-bit, 1-Msps SAR ADC with internal reference, Broadcaster roles sample-and-hold (S/H), and channel sequencer Switches between Central and Peripheral roles on-the-go Ultra-low-power LCD segment drive for 128 segments with Standard Bluetooth Low Energy profiles and services for operation in Deep-Sleep mode interoperability Custom profile and service for specific use cases Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 001-95464 Rev. *J Revised September 16, 2016 PRoC BLE: CYBL1XX7X Family Datasheet More Information Cypress provides a wealth of data at