KMA210:115 NXP

KMA210 Programmable angle sensor Rev. 2 7 December 2011 Product data sheet 1. Product profile 1.1 General description The KMA210 is a magnetic angle sensor module. The MagnetoResistive (MR) sensor bridges, the mixed signal Integrated Circuit (IC) and the required capacitances are integrated into a single package. This angular measurement module KMA210 is pre-programmed, pre-calibrated and therefore, ready to use. The KMA210 allows user-specific adjustments of angular range, zero angle and clamping voltages. The settings are stored permanently in a non-volatile memory. 1.2 Features and benefits High precision sensor for magnetic High temperature range up to 160 C angular measurement Single package sensor module with Ratiometric analog output voltage integrated filters for improved ElectroMagnetic Compatibility (EMC) Automotive qualified in accordance with Overvoltage protection up to 16 V AEC-Q100 Rev-G Programmable user adjustments, Programming via One-Wire Interface including zero angle and angular range (OWI) Fail-safe non-volatile memory with write User-programmable 32-bit identifier protection using lock bit Independent from magnetic field Magnet-loss, power-loss and broken strength above 35 kA/m bond wire detection Ready to use without external Factory calibrated componentsKMA210 NXP Semiconductors Programmable angle sensor 2. Pinning information Table 1. Pinning Pin Symbol Description Simplified outline 1V supply voltage DD 2 GND ground 3 OUT/DATA analog output or data interface 123 3. Ordering information Table 2. Ordering information Type number Package Name Description Version KMA210 - plastic single-ended multi-chip package SOT1288 6 interconnections 3 in-line leads KMA210 All information provided in this document is subject to legal disclaimers. NXP B.V. 2011. All rights reserved. Product data sheet Rev. 2 7 December 2011 2 of 37