KMA215,118 NXP

KMA215 Programmable angle sensor with SAE J2716 SENT Rev. 1 24 February 2014 Product data sheet 1. Product profile 1.1 General description The KMA215 is a magnetic angle sensor module with digital output in accordance with SAE J2716 JAN2010 Single Edge Nibble Transmission (SENT). The MagnetoResistive (MR) sensor bridges, the mixed signal Integrated Circuit (IC) and the required capacitors are integrated into a single package. This angular measurement module KMA215 is pre-programmed, pre-calibrated and therefore, ready to use. The default configuration for the digital output is SENT2010-03.0us-6dn-npp-nsp-A.3. The KMA215 allows user-specific adjustments of angular range, zero angle and SENT configuration. The settings are stored in a multi-time programmable non-volatile memory. 1.2 Features and benefits High precision sensor for magnetic High temperature range up to 160 C angular measurement Single package sensor module with Overvoltage protection up to 16 V integrated filters and pulse shaping for improved ElectroMagnetic Compatibility (EMC) Automotive qualified in accordance with Push pull output stage compliant with AEC-Q100 Rev-G SAE J2716 JAN2010 SENT with pulse shaping Programmable user adjustments, Optional high-speed 12-bit SENT angular range, zero angle and SENT message format H.3 configuration Fail-safe non-volatile memory with write Optional enhanced serial data protection using lock bit communication Independent from magnetic field Programming via One-Wire Interface strength above 35 kA/m (OWI) Ready to use without external 8 user-programmable SENT messages components (8 12 bit) Factory calibrated Magnet-loss and broken bond wire detectionKMA215 NXP Semiconductors Programmable angle sensor with SAE J2716 SENT 1.2.1 Extract of SENT modes (shorthand notation) SENT2010-03.0us-6dn-npp-nsp-A.3 (default configuration) SENT2010-03.0us-6dn-npp-esp-A.3 SENT2010-03.0us-6dn-ppc(297.0)-nsp-A.3 SENT2010-03.0us-6dn-ppc(297.0)-esp-A.3 SENT2010-06.0us-6dn-npp-nsp-A.3 SENT2010-06.0us-6dn-npp-esp-A.3 SENT2010-06.0us-6dn-ppc(297.0)-nsp-A.3 SENT2010-06.0us-6dn-ppc(297.0)-esp-A.3 SENT201x-03.0us-4dn-npp-nsp-H.3 SENT201x-03.0us-4dn-npp-esp-H.3 Additional SENT modes can be found in Table 8, Table 12 and Table 15. 2. Pinning information Table 1. Pinning Pin Symbol Description Simplified outline supply voltage 1V DD 2 GND ground 3 OUT/DATA SENT output or OWI data interface 3. Ordering information Table 2. Ordering information Type number Package Name Description Version KMA215 - plastic single-ended multi-chip package SOT1288-2 6 interconnections 3 in-line leads KMA215 All information provided in this document is subject to legal disclaimers. NXP B.V. 2014. All rights reserved. Product data sheet Rev. 1 24 February 2014 2 of 50