LPC2210/2220 16/32-bit ARM microcontrollers ashless, with 10-bit ADC and external memory interface Rev. 06 11 December 2008 Product data sheet 1. General description The LPC2210/2220 microcontrollers are based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. With their 144-pin package, low power consumption, various 32-bit timers, 8-channel 10-bit ADC, PWM channels, and up to nine external interrupt pins these microcontrollers are particularly suitable for industrial control, medical systems, access control and point-of-sale. The LPC2210/2220 can provide up to 76 GPIOs depending on bus conguration. With a wide range of serial communications interfaces, it is also very well suited for communication gateways, protocol converters and embedded soft modems as well as many other general-purpose applications. Remark: Throughout the data sheet, the term LPC2210/2220 will apply to devices with and without the /01 sufx. The /01 sufx will be used to differentiate LPC2210 devices only when necessary. 2. Features 2.1 Key features n 16/32-bit ARM7TDMI-S microcontroller in a LQFP144 and TFBGA144 package. n 16/64 kB on-chip static RAM (LPC2210/2220). n Serial bootloader using UART0 provides in-system download and programming capabilities. n EmbeddedICE-RT and Embedded Trace interfaces offer real-time debugging with the on-chip RealMonitor software as well as high-speed real-time tracing of instruction execution. n Eight channel 10-bit ADC with conversion time as low as 2.44 s. u LPC2210/01 and LPC2220 only: Dedicated result registers for ADC(s) reduce interrupt overhead. The ADC pads are 5 V tolerant when congured for digital I/O function(s). n Two 32-bit timers (LPC2220 and LPC2210/01 also external event counters) with four capture and four compare channels, PWM unit (six outputs), Real-Time Clock (RTC), and watchdog. 2 n Multiple serial interfaces including two UARTs (16C550), Fast I C-bus (400 kbit/s) and two SPIs. u LPC2210/01 and LPC2220 only: A Synchronous Serial Port (SSP) with data buffers and variable length transfers can be selected to replace one SPI.LPC2210/2220 NXP Semiconductors 16/32-bit ARM microcontrollers u LPC2210/01 and LPC2220 only: UART0/1 include fractional baud rate generator, auto-bauding capabilities, and handshake ow-control fully implemented in hardware. n Vectored Interrupt Controller (VIC) with congurable priorities and vector addresses. n Congurable external memory interface with up to four banks, each up to 16 MB and 8/16/32-bit data width. n Up to 76 general purpose pins (5 V tolerant) capable. Up to nine edge/level sensitive external interrupt pins available. u LPC2210/01 and LPC2220 only: Fast GPIO ports enable port pin toggling up to 3.5 times faster than the original device. They also allow for a port pin to be read at any time regardless of its function. n 60 MHz (LPC2210) and 75 MHz (LPC2210/01 and LPC2220) maximum CPU clock available from programmable on-chip Phase-Locked Loop (PLL) with settling time of 100 s. n On-chip integrated oscillator operates with external crystal in range of 1 MHz to 25 MHz and with external oscillator up to 25 MHz. n Power saving modes include Idle and Power-down. n Processor wake-up from Power-down mode via external interrupt. n Individual enable/disable of peripheral functions for power optimization. n Dual power supply: u CPU operating voltage range of 1.65 V to 1.95 V (1.8 V 0.15 V). u I/O power supply range of 3.0 V to 3.6 V (3.3 V 10 %) with 5 V tolerant I/O pads. 16/32-bit ARM7TDMI-S processor. 3. Ordering information Table 1. Ordering information Type number Package Name Description Version LPC2210FBD144 LQFP144 plastic low prole quad at package 144 SOT486-1 leads body 20 20 1.4 mm LPC2210FBD144/01 LQFP144 plastic low prole quad at package 144 SOT486-1 leads body 20 20 1.4 mm LPC2220FBD144 LQFP144 plastic low prole quad at package 144 SOT486-1 leads body 20 20 1.4 mm LPC2220FET144 TFBGA144 plastic thin ne-pitch ball grid array package SOT569-2 144 balls body 12 12 0.8 mm LPC2220FET144/G TFBGA144 plastic thin ne-pitch ball grid array package SOT569-2 144 balls body 12 12 0.8 mm LPC2210 2220 6 NXP B.V. 2008. All rights reserved. Product data sheet Rev. 06 11 December 2008 2 of 50