Document Number: MIMXRT1050EVKHUG NXP Semiconductors User s Guide Rev. 2 , 03/2018 MIMXRT1050 EVK Board Hardware Users Guide Contents 1. Introduction ........................................................................ 1 Board overview ....................................................... 1 1. Introduction MIMXRT1050 EVK Contents ................................ 3 MIMXRT1050 EVK Board revision history ........... 3 This document is a Hardware Users Guide for the 2. Specifications ..................................................................... 4 MIMXRT1050 Evaluation Kit (EVK) based on the NXP i.MX RT1050 Processor ......................................... 6 Boot Mode Configurations ...................................... 7 Semiconductor i.MX RT1050 Processor. This board is fully Power Tree .............................................................. 7 supported by NXP Semiconductor. This manual includes SDRAM memory .................................................. 10 system setup and debugging, and provides detailed SD Card Slot ......................................................... 10 Hyper Flash ........................................................... 11 information on the overall design and usage of the EVK board QSPI Flash ............................................................ 11 from a hardware systems perspective. Ethernet Connector ............................................... 11 USB PHY Connector ............................................ 11 Audio input / output Connector ............................. 12 OpenSDA circuit (DAP-Link) .............................. 12 1.1. Board overview JTAG Connector ................................................... 12 Arduino Expansion Port ........................................ 13 This EVK board is a platform designed to showcase the most Camera Module Connector ................................... 14 commonly used features of the i.MX RT1050 Processor in a User Interface Switch ............................................ 14 small, low cost package. The MIMXRT1050 EVK board is an Sensor ................................................................... 15 User Interface LED Indicator ................................ 15 entry level development board, which gives the developer the LCD Interface ....................................................... 15 option of becoming familiar with the processor before 3. PCB Information .............................................................. 16 investing a large amount or resources in more specific 4. EVK Design Files ............................................................ 16 5. Contents of the Evaluation Kit ......................................... 16 designs. 6. Revision history ............................................................... 17 2018 NXP B.V. Introduction Features of the MIMXRT1050 EVK board are shown in Table 1 Table 1. Board features NXP Processor MIMXRT1052DVL6A(A0 silicon) Processor MIMXRT1052DVL6B(A1 silicon) DRAM Memory SDRAM 256 Mb, 166MHz MT48LC16M16A2B4-6AIT: G DCDC MPS MP2144GJ UNION UM1550S-18 LDO UM1750S-00 TF Card Slot Mass Storage 64 Mbit Quad SPI Flash 512 Mbit Hyper Flash Display Interface LCD Connector Ethernet 10/100 Mbit/s Ethernet Connector. PHY Chip: KSZ8081RNB USB 2.0 OTG Connector USB USB 2.0 Host Connector 3.5 mm Audio Stereo Headphone Jack Board-Mounted Microphone Audio Connector Left & Right Speaker Out Connectors SPDIF Interface(unpopulated) Power Connector 5V DC-Jack JTAG 20-pin Connector (SWD by default) Debug Connector OpenSDA with DAP-Link Sensor FXOS8700CQ: 6-Axis Ecompass (3-Axis Mag, 3-Axis Accel) Camera CMOS Sensor Interface CAN CAN Bus Connector User Interface Button ON/OFF, POR Reset, Reset, USER Button Led Indicator Power Status, Reset, OpenSDA, USER LED Expansion Port Arduino Interface PCB 3.937-inch x 5.9055-inch (10cm x 15cm), 4-layer board MIMXRT1050 EVK Board Hardware Users Guide, User s Guide, Rev. 2, 03/2018 2 NXP Semiconductors