MMA1270KEG Freescale Semiconductor Rev 0, 11/2009 Technical Data Low G MMA1270KEG Micromachined Accelerometer The MMA series of silicon capacitive, micromachined accelerometers feature signal conditioning, a 2-pole low pass filter and temperature compensation. Zero-g offset full scale span and filter cut-off are factory set and require no external devices. A full system self-test capability verifies system functionality. MMA1270KEG: Z-AXIS SENSITIVITY Features MICROMACHINED ACCELEROMETER Integral Signal Conditioning 2.5g Linear Output 2nd Order Bessel Filter Calibrated Self-test EPROM Parity Check Status Transducer Hermetically Sealed at Wafer Level for Superior Reliability Robust Design, High Shock Survivability Qualified AEC-Q100, Rev. F Grade 2 (-40C/ +105C) Typical Applications Vibration Monitoring and Recording Appliance Control KEG SUFFIX (Pb-FREE) Mechanical Bearing Monitoring 16-LEAD SOIC Computer Hard Drive Protection CASE 475-01 Computer Mouse and Joysticks Virtual Reality Input Devices Sports Diagnostic Devices and Systems ORDERING INFORMATION Device Name Temperature Range Case No. Package MMA1270EG 40 to 105C 475-01 SOIC-16 MMA1270EGR2 40 to 105C 475-01 SOIC-16, Tape & Reel MMA1270KEG* 40 to 105C 475-01 SOIC-16 MMA1270KEGR2* 40 to 105C 475-01 SOIC-16, Tape & Reel *Part number sourced from a different facility. V DD 16 V 1 N/C Temp Comp SS G-Cell Integrator Gain Filter V OUT V 15 N/C and Gain 2 SS Sensor 14 V 3 N/C SS 13 V 4 N/C OUT 12 N/C STATUS 5 ST Control Logic & Clock V 11 Oscillator 6 N/C Self-test DD EPROM Trim Circuits Generator V 10 V N/C SS 7 SS ST 9 N/C 8 STATUS Figure 2. Pin Connections Figure 1. Simplified Accelerometer Functional Block Diagram Freescale Semiconductor, Inc., 2009. All rights reserved.Table 1. Maximum Ratings (Maximum ratings are the limits to which the device can be exposed without causing permanent damage.) Rating Symbol Value Unit Powered Acceleration (all axes) G 1500 g pd Unpowered Acceleration (all axes) G 2000 g upd Supply Voltage V 0.3 to +7.0 V DD (1) Drop Test H 1.2 m drop Storage Temperature Range T 40 to +125 C stg 1. Dropped onto concrete surface from any axis. ELECTRO STATIC DISCHARGE (ESD) WARNING: This device is sensitive to electrostatic discharge. Although the Freescale accelerometers contain internal performance or cause failure of the chip. When handling the 2kV ESD protection circuitry, extra precaution must be taken accelerometer, proper ESD precautions should be followed by the user to protect the chip from ESD. A charge of over to avoid exposing the device to discharges which may be 2000 volts can accumulate on the human body or associated detrimental to its performance. test equipment. A charge of this magnitude can alter the MMA1270KEG Sensors 2 Freescale Semiconductor