MPC7410HX450LE NXP

Document Number: MPC7410ECS07AD Freescale Semiconductor Rev. 2, 11/2010 Technical Data MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnNE Series This document describes part-number-specific changes to Freescale Part Numbers Affected: the MPC7410 RISC Microprocessor Hardware MPC7410TRX400NE Specifications (Document No. MPC7410EC). MPC7410TRX450NE MPC7410THX450NE Specifications provided in this document supersede those in the MPC7410 RISC Microprocessor Hardware Specifications, Rev. 6.1 or later, for the part numbers listed in Table A. only. Specifications not addressed herein are unchanged. Because this document is frequently updated, see the website listed on the back page of this document or contact your Freescale sales office for the latest version. 2010 Freescale Semiconductor, Inc. All rights reserved.Table A. Part-Number-Specific Changes Operating Conditions Freescale Part Significant Differences from Hardware Number CPU Specification Vdd T (C) OVdd J Frequency MPC7410TRX400NE 400 MHz 1.5V50mV -40 to 105 1.8/2.5 V Extended temperature range. Reduced core voltage to achieve lower power consumption. Removes 3.3 V OVdd support. For all AC/DC specifications not mentioned in this document, see the MPC7410RX400LE specifications in the general MPC7410 Hardware Specifications. 450 MHz 1.8V100mV -40 to 105 1.8/2.5/3.3 V Extended temperature range. The MPC7410TRX400NE also fully conforms to the MPC7410TRX450LE specification. See the general MPC7410 Hardware Specifications. MPC7410TRX450NE 450 MHz 1.5V50mV -40 to 105 1.8/2.5 V Extended temperature range. Reduced core voltage to achieve lower power consumption. Removes 3.3V OVdd support. For all AC/DC specifications not mentioned in this document, please refer to the MPC7410RX450LE specifications in the general MPC7410 Hardware Specifications. 500 MHz 1.8V100mV -40 to 105 1.8/2.5/3.3 V Extended temperature range. The MPC7410TRX450NE also fully conforms to the MPC7410TRX500LE specification. See the general MPC7410 Hardware Specifications. MPC7410THX450NE 450 MHz 1.5V50mV -40 to 105 1.8/2.5 V Extended temperature range. Reduced core voltage to achieve lower power consumption. Removes 3.3V OVdd support. For all AC/DC specifications not mentioned in this document, see to the MPC7410HX450LE specifications in the general MPC7410 Hardware Specifications. 500 MHz 1.8V100mV -40 to 105 1.8/2.5/3.3 V Extended temperature range. The MPC7410THX450NE also fully conforms to the MPC7410THX500LE specification. See the general MPC7410 Hardware Specifications. Features The MPC7410TxxnnnNE feature set is identical to that of the MPC7410, with the following exceptions: Bus interface Selectable interface voltages of 1.8 V, 2.5 V (3.3 V is not supported) DC Electrical Characteristics The MPC7410TxxnnnNE DC electrical characteristics are identical to that of the MPC7410, with the exceptions shown in Table B, Table C, and Table D. MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnNE Series, Rev. 2 2 Freescale Semiconductor