NTAG213F/216F NFC Forum Type 2 Tag compliant IC with 144/888 bytes user memory and field detection Rev. 3.6 28 September 2015 Product data sheet 262236 COMPANY PUBLIC 1. General description The NTAG213F and NTAG216F are the new NFC forum compliant Type 2 Tag products developed by NXP Semiconductors for applications in electronics (i.e. connection handover, Bluetooth simple pairing, Wi-Fi Protected set-up, device authentication, gaming and others) - see Figure 1. On top of offering a large range of User memory (144 bytes for NTAG213F and 888 bytes for NTAG216F), the NTAG21xF product family offers innovative functionalities like configuration of the field detection, the SLEEP mode, the FAST READ command and a configurable password protection. The NTAG21xF product family is designed to fully comply to NFC Forum Type 2 Tag (Ref. 2) and ISO/IEC14443 Type A (Ref. 1) specifications. The NTAG21xF product family also offers the same package (HXSON4), the same input capacitance and a full pinning compatibility to the NTAG203F product. 1.1 Contactless energy and data transfer Communication to NTAG21xF can be established only when the IC is connected to an antenna. Form and specification of the antenna is out of scope of this document. When NTAG21xF is positioned in the RF field, the high speed RF communication interface allows the transmission of the data with a baud rate of 106 kbit/s. Micro EEPROM controller NFC enabled device Wake up Field detection Data Energy aaa-010846 Fig 1. NTAG F conceptNTAG213F/216F NXP Semiconductors NFC Forum T2T IC with 144/888 bytes user memory and field detection 1.2 Simple deployment and user convenience NTAG21xF offers specific features designed to improve integration and user convenience: The fast read capability allows to scan the complete NDEF message with only one FAST READ command, thus reducing the communication time overhead The improved RF performance allows for more flexibility in the choice of shape, dimension and materials The HXSON4 package delivery form is the same one used as the NTAG203F with the same pinning The field detect functionality is based on an open-drain implementation that requires only one pull up resistor 1.3 Security Manufacturer programmed 7-byte UID for each device Capability container with one time programmable bits Field programmable read-only locking function per page up to 0Fh page (per 2 pages (NTAG 213F) or per 16 pages (NTAG 216F) for the extended memory section) ECC based originality signature 32-bit password protection to prevent unauthorized memory operations 1.4 Field detection The NTAG21xF product family features an RF field detection functionality based on Open Drain (see Figure 2) that can be configured with different RF signal or actions trigger: upon any RF field presence upon the first Start-of-Frame (start of the communication) upon the selection of the tag The corresponding output signal can be used as interrupt source to e.g. wake up an embedded microcontroller or trigger further actions - e.g. Bluetooth and WiFi pairing. For more information on this feature, please refer to Ref. 8. V FD pin pull-up resistor LA FD pin V DD NTAG21xF GND time LB GND RF field ON RF field OFF aaa-008522 Fig 2. Field detection implementation in NTAG21xF NTAG213F 216F All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2015. All rights reserved. Product data sheet Rev. 3.6 28 September 2015 COMPANY PUBLIC 262236 2 of 55