NTS0102DP-Q100H NXP

NTS0102 Dual supply translating transceiver open-drain auto direction sensing Rev. 4.1 12 November 2021 Product data sheet 1 General description The NTS0102 is a 2-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 2-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (V and CC(A) V ). V can be supplied at any voltage between 1.65 V and 3.6 V and V CC(B) CC(A) CC(B) can be supplied at any voltage between 2.3 V and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V, and 5.0 V). Pins An and OE are referenced to V and pins Bn are referenced to V . A LOW level at CC(A) CC(B) pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for partial power-down applications using I . The I circuitry disables the OFF OFF output, preventing the damaging backflow current through the device when it is powered down. 2 Features and benefits Wide supply voltage range: V : 1.65 V to 3.6 V and V : 2.3 V to 5.5 V CC(A) CC(B) Maximum data rates: Push-pull: 50 Mbit/s I circuitry provides partial Power-down mode operation OFF Inputs accept voltages up to 5.5 V ESD protection: HBM JESD22-A114E Class 2 exceeds 2500 V for A port HBM JESD22-A114E Class 3B exceeds 8000 V for B port MM JESD22-A115-A exceeds 200 V CDM JESD22-C101E exceeds 1500 V Latch-up performance exceeds 100 mA per JESD 78B Class II Multiple package options Specified from 40 C to +85 C and -40 C to +125 C 3 Applications 2 I C/SMBus UART GPIONXP Semiconductors NTS0102 Dual supply translating transceiver open-drain auto direction sensing 4 Ordering information Table 1.Ordering information Type number Topside Package marking Name Description Version NTS0102DP s02 TSSOP8 plastic thin shrink small outline package 8 leads body width SOT505-2 3 mm lead length 0.5 mm NTS0102GT s02 XSON8 plastic extremely thin small outline package no leads 8 SOT833-1 terminals body 1 1.95 0.5 mm NTS0102GD s02 XSON8 plastic extremely thin small outline package no leads 8 SOT996-2 terminals body 3 2 0.5 mm NTS0102GF s2 XSON8 extremely thin small outline package no leads 8 terminals SOT1089 body 1.35 1 0.5 mm NTS0102TL tS2 XSON8 plastic extremely thin small outline package no leads 8 SOT1052-2 terminals body 3 x 2 x 0.5 mm 4.1 Ordering options Table 2.Ordering options Packing Minimum order Type number Orderable part Package Temperature 1 method quantity number NTS0102DP NTS0102DP,125 TSSOP8 Reel 7 Q3 NDP 3000 40 C to +125 C NTS0102GT NTS0102GT,115 XSON8 Reel 7 Q1 NDP 5000 40 C to +125 C 2 NTS0102GD NTS0102GD,125 XSON8 Reel 7 Q3 NDP 3000 40 C to +125 C NTS0102GF NTS0102GF,115 XSON8 Reel 7 Q1 NDP 5000 40 C to +125 C NTS0102TL NTS0102TLH XSON8 Reel 7 Q3 NDP 3000 40 C to +125 C 1 Standard packing quantities and other packaging data are available at www.nxp.com/packages/. 2 Discontinuation Notice 202111012DN - drop in replacement is NTS0102TLH. NTS0102 All information provided in this document is subject to legal disclaimers. NXP B.V. 2021. All rights reserved. Product data sheet Rev. 4.1 12 November 2021 2 / 25