NX5P3363 USB PD and Type-C current-limited power switch Rev. 1.1 7 June 2019 Product data sheet 1. General description The NX5P3363 is a precision adjustable current-limited power switch for USB PD application. The device includes under voltage lockout, over-temperature protection, and reverse current protection circuits to automatically isolate the switch terminals when a fault condition occurs. The 29 V tolerance on VBUS pin ensures the device is able to work on a USB PD port a current limit input (ILIM) pin defines the overcurrent limit threshold an open-drain fault output (FLT) indicates when a fault condition has occurred. The overcurrent limit threshold can be programmed from 400 mA to 3.3 A, using an external resistor between the ILIM pin and GND pin. In the over current condition, the device will clamp the output current to the value set by ILIM and keep the switch on while asserting the FLT flag. To minimize current surges during normal turn on, the device has built in soft start by limiting the power switch turn on slew rate. However, user can disable the soft start and request a fast output by pulling FO pin HIGH. A fast RCP recovery circuit has been added to the switch to prevent reverse current flowing back to power source at all times. When exiting from reverse current protection state, the power MOSFET will turn on within 50 us. The fast RCP recovery ensures the voltage on VBUS doesnt drop too much in a power source swap application. NX5P3363 is offered in a 2.2 x 2.2 mm, 16 bump WLCSP package. 2. Features and benefits VIN supply voltage range from 4.0 V to 5.5 V All time reverse current protection with ultra fast RCP recovery Adjustable current limit from 400 mA to 3.3 A Clamped current output in overcurrent condition 29 V high voltage tolerance on VBUS pin Low ON resistance of the power FETs: 35 m (typical) in total Surge protection: IEC61000-4-5 exceeds 80 V on VBUS Over temperature protection Safety approvals UL 62368-1, 2nd edition, file no. 20170804-E470128 IEC 62368-1, 2nd edition, file no. DK-65509-UL ESD protection IEC61000-4-2 contact discharge exceeds 8 kV on VBUS HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2 kV CDM AEC standard Q100-01 (JESD22-C101E) exceeds 500 VNX5P3363 NXP Semiconductors USB PD and Type-C current-limited power switch Specified from 40 Cto+85 C ambient temperature 3. Applications Notebook, ultrabook and desktop USB PD and Type C port/hubs Tablet and smart phone 4. Ordering information Table 1. Ordering information Type number Topside Package marking Name Description Version NX5P3363UK X5PT6 WLCSP16 wafer level chip-scale package 16 bumps 2.2 x 2.2 mm x SOT1394-3 0.555 mm (backside coating included) 4.1 Ordering options Table 2. Ordering options Type number Orderable Package Packing method Minimum Temperature part number order quantity NX5P3363UK NX5P3363UKZ WLCSP16 REEL 7 Q1/T1 3000 T = 40 C to +85 C amb *SPECIAL MARK CHIPS DP 5. Marking Table 3. Marking Line Marking Description A X5PT6 basic type name B mmmmmmnn wafer lot code (mmmmmm) and wafer number (nn) C XtDYYWW manufacturing code: X = foundry location t = assembly location D = RoHS code (dark green) YY = assembly year code WW = assembly week code NX5P3363 All information provided in this document is subject to legal disclaimers. NXP B.V. 2019. All rights reserved. Product data sheet Rev. 1.1 7 June 2019 2 of 26