PCF8593T/1,112 NXP

PCF8593 Low power clock and calendar Rev. 04 6 October 2010 Product data sheet 1. General description 1 The PCF8593 is a CMOS clock and calendar circuit, optimized for low power consumption. Addresses and data are transferred serially via the two-line bidirectional 2 I C-bus. The built-in word address register is incremented automatically after each written or read data byte. The built-in 32.768 kHz oscillator circuit and the first 8 bytes of the RAM are used for the clock, calendar, and counter functions. The next 8 bytes can be programmed as alarm registers or used as free RAM space. 2. Features and benefits 2 I C-bus interface operating supply voltage: 2.5 V to 6.0 V Clock operating supply voltage 1.0 V to 6.0 V at 0 Cto+70 C 8 bytes scratchpad RAM (when alarm not used) Data retention voltage: 1.0 V to 6.0 V 2 External RESET input resets I C interface only Operating current (at f = 0 Hz, 32 kHz time base, V = 2.0 V): typical 1 A SCL DD Clock function with four year calendar Universal timer with alarm and overflow indication 24 hour or 12 hour format 32.768 kHz or 50 Hz time base 2 Serial input and output bus (I C-bus) Automatic word address incrementing Programmable alarm, timer, and interrupt function Space-saving SO8 package available Slave addresses: A3h for reading, A2h for writing 3. Ordering information Table 1. Ordering information Type number Package Name Description Version PCF8593P DIP8 plastic dual in-line package 8 leads (300 mil) SOT97-1 PCF8593T SO8 plastic small outline package 8 leads SOT96-1 body width 3.9 mm 1. The definition of the abbreviations and acronyms used in this data sheet can be found in Section 14.PCF8593 NXP Semiconductors Low power clock and calendar 4. Marking Table 2. Marking codes Type number Marking code PCF8593P PCF8593P PCF8593T 8583T 5. Block diagram V DD OSCI DIVIDER OSCILLATOR OSCO 00h control/status INT 01h hundredth second 02h seconds 03h minutes CONTROL RESET RESET LOGIC 04h hours year/date 05h 06h PCF8593 weekdays/months timer 07h SCL 08h alarm control 2 I C-BUS ADDRESS to INTERFACE REGISTER alarm or RAM SDA 0Fh 013aaa379 V SS Fig 1. Block diagram of PCF8593 PCF8593 All information provided in this document is subject to legal disclaimers. NXP B.V. 2010. All rights reserved. Product data sheet Rev. 04 6 October 2010 2 of 35