SA604AD/01 NXP

SA604A High-performance low-power FM IF system Rev. 4.3 13 July 2016 Product data sheet 1. General description The SA604A is an improved monolithic low-power FM IF system incorporating two limiting intermediate frequency amplifiers, quadrature detector, muting, logarithmic received signal strength indicator, and voltage regulator. The SA604A features higher IF bandwidth (25 MHz) and temperature compensated RSSI and limiters providing wide RSSI dynamic range, high IF/limiter gain and overall stability. The SA604A is available in an SO16 (surface-mounted miniature) and HXQFN16 package. 2. Features and benefits Low power consumption: 3.3 mA typical Temperature compensated logarithmic Received Signal Strength Indicator (RSSI) with a dynamic range in excess of 90 dB Two audio outputs muted and un-muted Low external component count suitable for crystal/ceramic filters Excellent sensitivity: 1.5 V across input pins (0.22 V into 50 matching network) for 12 dB SINAD (Signal-to-Noise and Distortion ratio) at 455 kHz SA604A meets cellular radio specifications 3. Applications Cellular radio FM IF High-performance communications receivers Intermediate frequency amplification and detection up to 25 MHz RF level meter Spectrum analyzer Instrumentation FSK and ASK data receiversSA604A NXP Semiconductors High-performance low-power FM IF system 4. Ordering information Table 1. Ordering information Type number Topside Package marking Name Description Version SA604AD/01 SA604AD SO16 plastic small outline package 16 leads body width 3.9 mm SOT109-1 SA604AD/02 SA604AD SO16 plastic small outline package 16 leads body width 3.9 mm SOT109-1 SA604AHR 04A HXQFN16 plastic thermal enhanced extremely thin quad flat package SOT1039-2 no leads 16 terminals body 3 3 0.5 mm 4.1 Ordering options Table 2. Ordering options Type number Orderable Package Packing method Minimum Temperature part number order quantity SA604AD/01 SA604AD/01,112 SO16 Standard marking 1000 T = 40 C to +85 C amb * ICs tube - DSC bulk pack SA604AD/01,118 SO16 Reel 13 Q1/T1 2500 T = 40 C to +85 C amb *Standard mark SMD SA604AD/02 SA604AD/02J SO16 Reel 13 Q1/T1 2500 T = 40 C to +85 C amb *Standard mark SMD SA604AHR SA604AHRZ HXQFN16 Reel 7 Q2/T3 1500 T = 40 C to +85 C amb *Standard mark SMD SA604A All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2016. All rights reserved. Product data sheet Rev. 4.3 13 July 2016 2 of 31