DATA SHEET SKY65013-70LF: 0.1 to 7.0 GHz InGaP Cascadable Amplifier Applications Wireless infrastructure: WLAN, WiMAX, broadband, cellular base stations INPUT OUTPUT Test instrumentation (50 ) (50 ) Cable television 200360-001 Figure 1. SKY65013-70LF Functional Block Diagram Features Broadband frequency range: 0.1 to 7.0 GHz Description Small signal gain = 12.5 dB typical 2 GHz Skyworks SKY65013-70LF is a general purpose, broadband High OIP3: +29 dBm typical amplifier. The device is fabricated from Skyworks InGaP HBT OP1dB = +12.5 dBm typical 2 GHz process and packaged in a miniature Small Outline Transistor (SOT-89) package. Input and output impedance: 50 nominal The devices 50 input and output impedance allow it to be Single, positive DC supply voltage easily cascaded with a simple input impedance matching SOT-89 (4-pin, 1.5 x 4.0 mm) package network. The typical useable bandwidth of the SKY65013-70LF is (MSL1, 260 C per JEDEC J-STD-020) 0.1 to 7.0 GHz. The amplifier is also available in a plastic micro-X package (SKY65013-214LF) and an SC-88 package (SKY65013-92LF). A functional block diagram is provided in Figure 1. The device TM Skyworks Green products are compliant with package and pinout are shown in Figure 2. all applicable legislation and are halogen-free. For additional information, refer to Skyworks TM GND Denition of Green , document number SQ040074. 4 12 3 INPUT GND OUTPUT 200360-002 Figure 2. SKY65013-70LF Pinout (Top View) Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 200360H Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice December 12, 2018 1 DATA SHEET SKY65013-70LF: CASCADABLE AMPLIFIER Electrical and Mechanical Specifications Signal pin assignments and functional pin descriptions are Electrical specifications are provided in Table 3. described in Table 1. The absolute maximum ratings of the Typical performance characteristics of the SKY65013-70LF are SKY65013-70LF are provided in Table 2. illustrated in Figures 3 through 6. Table 1. SKY65013-70LF Signal Descriptions Pin Name Description RF input with 50 nominal input impedance. An internally generated DC voltage 1 INPUT is present at this pin, so an external DC block should be used to connect this pin to the external circuit. 2 GND Ground RF output. DC supply voltage input and RF output with 50 nominal output impedance. The nominal voltage required at this pin is listed in Table 3. Supply 3 OUTPUT current is determined by an external resistor connected between the DC power supply and this pin. 4 GND Ground 1 Table 2. SKY65013-70LF Absolute Maximum Ratings Parameter Symbol Min Max Units Supply voltage VDD 5 V RF input power PIN +15 dBm Supply current IDD 120 mA Power dissipation TC = 25 C PD 600 mW Operating case temperature TC -40 +85 C Storage temperature TST -65 +125 C Junction temperature TJ +150 C Thermal resistance JC 70 C/W 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal values. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 December 12, 2018 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200360H