DATA SHEET SKY65017-70LF: 0.1 to 6.0 GHz InGaP Cascadable Amplifier Applications Wireless infrastructure: WLAN, HLAN, DBS, broadband, cellular base stations INPUT OUTPUT Test instrumentation (50 ) (50 ) Cable television 200528-001 Figure 1. SKY65017-70LF Functional Block Diagram Features Broadband frequency range: 0.1 to 6.0 GHz Description Small signal gain = 20 dB typical 2 GHz Skyworks SKY65017-70LF is a general purpose, broadband High OIP3: +33 dBm typical amplifier. The device is fabricated from Skyworks InGaP HBT OP1dB = +20 dBm typical 2 GHz process and packaged in a miniature Small Outline Transistor (SOT-89) package. Input and output impedance: 50 nominal The devices 50 input and output impedance allow it to be Single, positive DC supply voltage easily cascaded without external impedance matching networks. SOT-89 (4-pin, 1.5 x 4.0 mm) package The typical -3 dB bandwidth of the SKY65017-70LF is 0.1 to (MSL1, 260 C per JEDEC J-STD-020) 6.0 GHz. A functional block diagram is provided in Figure 1. The device TM package and pinout are shown in Figure 2. Skyworks Green products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks GND TM Denition of Green , document number SQ040074. 4 12 3 INPUT GND OUTPUT 200528-002 Figure 2. SKY65017-70LF Pinout Package (Top View) Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 200528J Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice December 11, 2018 1 DATA SHEET SKY65017-70LF: CASCADABLE AMPLIFIER Electrical and Mechanical Specifications Signal pin assignments and functional pin descriptions are Typical performance characteristics of the SKY65017-70LF are described in Table 1. The absolute maximum ratings of the illustrated in Figures 3 through 6. SKY65017-70LF are provided in Table 2. Electrical specifications are provided in Table 3. Table 1. SKY65017-70LF Signal Descriptions Pin Name Description RF input with 50 nominal input impedance. An internally generated DC voltage is present at this pin, so an external DC block 1 INPUT should be used to connect this pin to the external circuit. 2 GND Ground RF output. DC supply voltage input and RF output with 50 nominal output impedance. The nominal voltage required at this pin is 3 OUTPUT listed in Table 3. Supply current is determined by an external resistor connected between the DC power supply and this pin. 4 GND Ground 1 Table 2. SKY65017-70LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Supply voltage VCC 6 V RF input power PIN +10 dBm Supply current ICC 120 mA Power dissipation TC = 25 C PD 510 mW Operating case temperature TC -40 +85 C Storage temperature TST -65 +125 C Junction temperature TJ +150 C Thermal resistance JC 70 C/W 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal values. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 December 11, 2018 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200528J