DATA SHEET SKY65016-70LF: 0.1 to 3.0 GHz InGaP Cascadable Amplifier Applications Wireless infrastructure: WLAN, HLAN, DBS, broadband, cellular base stations Test instrumentation Cable television INPUT OUTPUT (50 ) (50 ) Features 200357-001 Broadband frequency range: 0.1 to 3.0 GHz Figure 1. SKY65016-70LF Functional Block Diagram Small signal gain = 20 dB typical 2 GHz High OIP3: +27 dBm typical Description OP1dB = +14 dBm typical 2 GHz Skyworks SKY65016-70LF is a general purpose, broadband amplifier. The device is fabricated from Skyworks InGaP HBT Input and output impedance: 50 nominal process and packaged in a miniature Small Outline Transistor Single, positive DC supply voltage (SOT-89) package. SOT-89 (4-pin, 1.5 x 4.0 mm) package The devices 50 input and output impedance allow it to be (MSL1, 260 C per JEDEC J-STD-020) easily cascaded without external impedance matching networks. The typical 3 dB bandwidth of the SKY65016-70LF is 0.1 to 3.0 GHz. TM Skyworks Green products are compliant with A functional block diagram is provided in Figure 1. The device all applicable legislation and are halogen-free. package and pinout are shown in Figure 2. For additional information, refer to Skyworks TM Denition of Green , document number SQ040074. GND 4 12 3 INPUT GND OUTPUT 200357-002 Figure 2. SKY65016-70LF Pinout (Top View) Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 200357J Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice December 11, 2018 1 DATA SHEET SKY65016-70LF: CASCADABLE AMPLIFIER Typical performance characteristics of the SKY65016-70LF are Electrical and Mechanical Specifications illustrated in Figures 3 through 6. Signal pin assignments and functional pin descriptions are described in Table 1. The absolute maximum ratings of the SKY65016-70LF are provided in Table 2. Electrical specifications are provided in Table 3. Table 1. SKY65016-70LF Signal Descriptions Pin Name Description 1 INPUT RF input with 50 nominal input impedance. An internally generated DC voltage is present at this pin, so an external DC block should be used to connect this pin to the external circuit. 2 GND Ground 3 OUTPUT RF output. DC supply voltage input and RF output with 50 nominal output impedance. The nominal voltage required at this pin is listed in Table 3. Supply current is determined by an external resistor connected between the DC power supply and this pin. 4 GND Ground 1 Table 2. SKY65016-70LF Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Supply voltage VS 5 V RF input power PIN +15 dBm Supply current IS 120 mA Power dissipation TC = 25 C PD 500 mW Operating case temperature TC 40 +85 C Storage temperature TST 65 +125 C Junction temperature TJ +150 C Thermal resistance JC 70 C/W Electrostatic discharge: ESD Charged Device Model (CDM), Class III 500 V Human Body Model (HBM), Class 1B 500 V Machine Model (MM), Class A 100 V 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal values. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 December 11, 2018 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 200357J