SC16C852LIET,115 NXP

SC16C852L 1.8 V dual UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA) and 16 mode or 68 mode bus interface Rev. 4 1 February 2011 Product data sheet 1. General description The SC16C852L is a 1.8 V, low power, dual channel Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 5 Mbit/s. The SC16C852L is pin compatible with the SC16C652B. SC16C852L can be programmed to operate in extended mode (see Section 6.2) where additional advanced UART features are available. The SC16C852L UART provides enhanced UART functions with 128-byte FIFOs, modem control interface, DMA mode data transfer, and IrDA encoder/decoder. The DMA mode data transfer is controlled by the FIFO trigger levels and the TXRDYx and RXRDYx signals. On-board status registers provide the user with error indications and operational status. System interrupts and modem control features may be tailored by software to meet specific user requirements. An internal loopback capability allows on-board diagnostics. Independent programmable baud rate generators are provided to select transmit and receive baud rates. The SC16C852L with Intel (16 mode) or Motorola (68 mode) bus host interface operates at 1.8 V and is available in plastic LQFP48, TFBGA36 and very small (Micro-UART) HVQFN32 packages. 2. Features and benefits Dual channel high performance UART Intel or Motorola bus interface selectable using 16/68 pin 1.8 V operation Up to 5 Mbit/s data rate 128-byte transmit FIFO to reduce the bandwidth requirement of the external CPU 128-byte receive FIFO with error flags to reduce the bandwidth requirement of the external CPU 128 programmable Receive and Transmit FIFO interrupt trigger levels 128 Receive and Transmit FIFO reporting levels (level counters) Automatic software (Xon/Xoff) and hardware (RTS/CTS or DTR/DSR) flow control Industrial temperature range (40 C to +85 C) Pin, function, and software compatible to SC16C652B in LQFP48 package 128 hardware and software trigger levels Automatic 9-bit mode (RS-485) address detection Automatic RS-485 driver turn-around with programmable delay Dual channel concurrent write UART software resetSC16C852L NXP Semiconductors 1.8 V dual UART with 128-byte FIFOs and IrDA encoder/decoder 1 High resolution clock prescaler, from 0 to 15 with granularity of to allow 16 non-standard UART clock to be used Programmable Xon/Xoff characters Software selectable baud rate generator Support IrDA version 1.0 (up to 115.2 kbit/s) Standard modem interface or infrared IrDA encoder/decoder interface Enhanced Sleep mode and low power feature Modem control functions (CTS, RTS, DSR, DTR, RI, CD) Independent transmitter and receiver enable/disable Pb-free, RoHS compliant packages offered 3. Ordering information Table 1. Ordering information Type number Package Name Description Version SC16C852LIB LQFP48 plastic low profile quad flat package 48 leads SOT313-2 body 7 7 1.4 mm SC16C852LIBS HVQFN32 plastic thermal enhanced very thin quad flat package SOT617-1 no leads 32 terminals body 5 5 0.85 mm SC16C852LIET TFBGA36 plastic thin fine-pitch ball grid array package 36 balls SOT912-1 body 3.5 3.5 0.8 mm SC16C852L All information provided in this document is subject to legal disclaimers. NXP B.V. 2011. All rights reserved. Product data sheet Rev. 4 1 February 2011 2 of 64