TJA1040T/VM,118 NXP

INTEGRATED CIRCUITS DATA SHEET TJA1040 High speed CAN transceiver Product specication 2003 Oct 14 Supersedes data of 2003 Feb 19Philips Semiconductors Product specication High speed CAN transceiver TJA1040 FEATURES GENERAL DESCRIPTION Fully compatible with the ISO 11898 standard The TJA1040 is the interface between the Controller Area Network (CAN) protocol controller and the physical bus. High speed (up to 1 MBaud) It is primarily intended for high speed applications, up to Very low-current standby mode with remote wake-up 1 MBaud, in passenger cars. The device provides capability via the bus differential transmit capability to the bus and differential Very low ElectroMagnetic Emission (EME) receive capability to the CAN controller. Differential receiver with high common-mode range for The TJA1040 is the next step up from the TJA1050 high ElectroMagnetic Immunity (EMI) speed CAN transceiver. Being pin compatible and offering Transceiver in unpowered state disengages from the the same excellent EMC performance, the TJA1040 also bus (zero load) features: Input levels compatible with 3.3 V and 5 V devices An ideal passive behaviour when supply voltage is off Voltage source for stabilizing the recessive bus level if A very low-current standby mode with remote wake-up split termination is used (further improvement of EME) capability via the bus. At least 110 nodes can be connected This makes the TJA1040 an excellent choice in nodes which can be in power-down or standby mode in partially Transmit Data (TXD) dominant time-out function powered networks. Bus pins protected against transients in automotive environments Bus pins and pin SPLIT short-circuit proof to battery and ground Thermally protected. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT V supply voltage operating range 4.75 5.25 V CC I supply current standby mode 5 15 A CC V DC voltage on pin CANH 0 < V < 5.25 V no time limit - 27 +40 V CANH CC V DC voltage on pin CANL 0 < V < 5.25 V no time limit - 27 +40 V CANL CC V DC voltage on pin SPLIT 0 < V < 5.25 V no time limit - 27 +40 V SPLIT CC V electrostatic discharge voltage Human Body Model (HBM) esd pins CANH, CANL and SPLIT -6+6 kV all other pins -4+4 kV t propagation delay TXD to RXD V = 0 V 40 255 ns PD(TXD-RXD) STB T virtual junction temperature - 40 +150 C vj ORDERING INFORMATION PACKAGE TYPE NUMBER NAME DESCRIPTION VERSION TJA1040T SO8 plastic small outline package 8 leads body width 3.9 mm SOT96-1 TJA1040U - bare die die dimensions 1840 1440 380 m - 2003 Oct 14 2