TJA1059 Dual high-speed CAN transceiver with Standby mode Rev. 4 15 January 2018 Product data sheet 1. General description The TJA1059 is a dual high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN-bus. The transceiver is designed for high-speed CAN applications in the automotive and truck industries. It provides differential transmit and receive capabilities to (a microcontroller with) a CAN protocol controller. The TJA1059 belongs to the third generation of high-speed CAN transceivers from NXP Semiconductors, offering significant improvements over first- and second-generation devices such as the TJA1040. It offers improved Electro Magnetic Compatibility (EMC) and ElectroStatic Discharge (ESD) performance, and also features: Ideal passive behavior to the CAN-bus when the supply voltage is off A very low-current Standby mode with bus wake-up capability on both channels Can be interfaced directly to microcontrollers with supply voltages from 3 V to 5 V Complies with global OEM requirements, allowing a one-fits-all approach The TJA1059 implements the CAN physical layer as defined in ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 5 Mbit/s. These features make the TJA1059 an excellent choice for all types of HS-CAN networks containing more than one HS-CAN interface requiring a low-power mode with wake-up capability via the CAN-bus, especially for Body Control and Gateway units. 2. Features and benefits 2.1 General Two TJA1049 HS-CAN transceivers combined monolithically in a single package ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 compliant Timing guaranteed for data rates up to 5 Mbit/s in the CAN FD fast phase Suitable for 12 V and 24 V systems Low ElectroMagnetic Emission (EME) and high ElectroMagnetic Immunity (EMI) Excellent ElectroMagnetic Compatibility (EMC) performance, satisfying Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications, Version 1.3, May 2012. V input allows for direct interfacing with 3 V to 5 V microcontrollers IO Leadless HVSON14 package (3.0 mm 4.5 mm) with improved Automated Optical Inspection (AOI) capabilityTJA1059 NXP Semiconductors Dual high-speed CAN transceiver with Standby mode Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant) AEC-Q100 qualified 2.2 Predictable and fail-safe behavior Functional behavior predictable under all supply conditions Transceiver disengages from bus when not powered (zero load) Transmit Data (TXD) and bus dominant time-out functions Undervoltage detection on pins V and V CC IO Internal biasing of TXD1/TXD2 and STB1/STB2 input pins 2.3 Low-power management Very low-current Standby mode with host and bus wake-up capability Wake-up receiver powered by V allows shut down of V IO CC 2.4 Protection High ESD handling capability on the bus pins Bus pins protected against transients in automotive environments Thermally protected High-voltage robustness on the bus pins 3. Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit V supply voltage 4.75 - 5.25 V CC V supply voltage on pin V 2.85 - 5.25 V IO IO V undervoltage detection voltage 3.5 - 4.5 V uvd(VCC) on pin V CC V undervoltage detection voltage 1.3 2.0 2.7 V uvd(VIO) on pin V IO I supply current Standby mode - 0.5 5 A CC Normal mode both channels recessive - - 20 mA one channel dominant - - 80 mA both channels dominant - 90 140 mA I supply current on pin V Standby mode V =V -16.527 A IO IO TXD IO Normal mode both channels recessive - - 55 A one channel dominant - - 400 A both channels dominant - - 600 A V electrostatic discharge voltage IEC 61000-4-2 at pins CANHx and CANLx 6- +6 kV ESD TJA1059 All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2018. All rights reserved. Product data sheet Rev. 4 15 January 2018 2 of 26