UJA1162TK,118 NXP

UJA1162 Self-supplied high-speed CAN transceiver with Sleep mode Rev. 2 17 April 2014 Product data sheet 1. General description The UJA1162 is a self-supplied high-speed CAN transceiver integrating an ISO 11898-2/5 compliant HS-CAN transceiver and an internal 5 V CAN supply. The only supply input is a battery connection. The UJA1162 can be operated in a very low-current Sleep mode with local and bus wake-up capability. The UJA1162 implements the standard CAN physical layer as defined in the current ISO11898 standard (-2 and -5). Pending the release of the updated version of ISO11898 including CAN FD, additional timing parameters defining loop delay symmetry are included. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 2 Mbit/s. 2. Features and benefits 2.1 General Self-supplied high-speed CAN transceiver Loop delay symmetry timing enables reliable communication at data rates up to 2 Mbit/s in the CAN FD fast phase ISO 11898-2 and ISO 11898-5 compliant Autonomous bus biasing according to ISO 11898-6 Fully integrated 5 V supply (V ) for the CAN transmitter/receiver BUF VIO input allows for direct interfacing with 3.3 V to 5 V microcontrollers Bus connections are truly floating when power to pin BAT is off 2.2 Designed for automotive applications 8 kV ElectroStatic Discharge (ESD) protection, according to the Human Body Model (HBM) on the CAN bus pins 6 kV ESD protection, according to IEC 61000-4-2 on the CAN bus pins and on pins BAT and WAKE CAN bus pins short-circuit proof to 58 V Battery and CAN bus pins are protected against automotive transients according to ISO 7637-3 Very low quiescent current in Sleep mode Leadless HVSON14 package (3 mm 4.5 mm) with improved Automated Optical Inspection (AOI) capability Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant)UJA1162 NXP Semiconductors Self-supplied high-speed CAN transceiver with Sleep mode 2.3 Integrated supply voltage for the CAN transceiver (V ) BUF 5 V nominal output 2 % accuracy Undervoltage detection at 90 % of nominal value Excellent response with a 4.7 F ceramic output load capacitor Turned off in Sleep mode 2.4 Power Management Sleep mode featuring very low supply current Remote wake-up capability via standard CAN wake-up pattern Local wake-up capability via the WAKE pin Entire node can be powered down via the inhibit output, INH 2.5 System control and diagnostic features Mode control via SLPN pin Overtemperature shutdown Transmit data (TXD) dominant time-out function 3. Ordering information Table 1. Ordering information Type number Package Name Description Version UJA1162TK HVSON14 plastic thermal enhanced very thin small outline package no leads SOT1086-2 14 terminals body 3 4.5 0.85 mm UJA1162 All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2014. All rights reserved. Product data sheet Rev. 2 17 April 2014 2 of 29