UJA1163ATK/0Z NXP

UJA1163A Mini high-speed CAN system basis chip with Standby mode Rev. 1 23 August 2019 Product data sheet 1. General description The UJA1163A is a mini high-speed CAN System Basis Chip (SBC) containing an ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 compliant HS-CAN transceiver and an integrated 5 V/100 mA supply for a microcontroller. The UJA1163A can be operated in very-low-current Standby mode with bus wake-up capability and supports ISO 11898-6 compliant autonomous CAN biasing. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 5 Mbit/s. 2. Features and benefits 2.1 General ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 compliant high-speed CAN transceiver Hardware and software compatible with the UJA116x product family and with improved EMC performance Loop delay symmetry timing enables reliable communication at data rates up to 5 Mbit/s in the CAN FD fast phase Autonomous bus biasing according to ISO 11898-6 Fully integrated 5 V/100 mA low-drop voltage regulator for 5 V microcontroller supply (V1) Bus connections are truly floating when power to pin BAT is off 2.2 Designed for automotive applications 8 kV ElectroStatic Discharge (ESD) protection, according to the Human Body Model (HBM) on the CAN bus pins 6 kV ESD protection, according to IEC TS 62228 on the CAN bus pins and on pin BAT CAN bus pins short-circuit proof to 58 V Battery and CAN bus pins protected against automotive transients according to ISO 7637-3 Very low quiescent current in Standby mode with full wake-up capability Leadless HVSON14 package (3.0 mm 4.5 mm) with improved Automated Optical Inspection (AOI) capability and low thermal resistance Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant)UJA1163A NXP Semiconductors Mini high-speed CAN system basis chip with Standby mode 2.3 Low-drop voltage regulator for 5 V microcontroller supply (V1) 5 V nominal output 2 % accuracy 100 mA output current capability Current limiting above 150 mA On-resistance of 5 (max) Support for microcontroller RAM retention down to a battery voltage of 2 V Undervoltage reset at 90 % of nominal value Excellent transient response with a 4.7 F ceramic output capacitor Short-circuit to GND/overload protection on pin V1 2.4 Power Management Standby mode featuring very low supply current voltage V1 remains active to maintain the supply to the microcontroller Remote wake-up capability via standard CAN wake-up pattern 2.5 System control and diagnostic features Mode control via pin STBN Overtemperature shutdown Bidirectional reset pin 3. Ordering information Table 1. Ordering information Type number Package Name Description Version UJA1163ATK HVSON14 plastic thermal enhanced very thin small outline package no SOT1086-2 leads 14 terminals body 3 4.5 0.85 mm UJA1163A All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2019. All rights reserved. Product data sheet Rev. 1 23 August 2019 2 of 32