PRI S1 S2 F1 A262A6E AUDOI www.oep.co.uk Ratio 1+1 : 1 + 1 S1 S2 F1 26-0117 SEC RoHS 26-0117 2F 2F A B B2 A3 1 4 Secondary 1 Primary 1 3 2 B4 A1 3 2 4 1 Screen B1 A4 A1 Secondary 2 Primary 2 22.2 28.0 B3 A2 Screen Electrical characteristics: Materials: all materials are UL94V-0 rated Bobbin and box material: FR530 Winding ratio: 1+1:1+1 UL file number: E69578(M) (0.1) (0.2) (0.3) (0.2) DC resistance (ohms +/- 15%): 2.54 5.08 7.62 5.08 or Polyplastics Co. Ltd Primaries: 15 + 15. Secondaries: 20 + 20 Material name: 1140 A(C) Impedance: 150 ohms per winding C L UL file no. E109088(M) Inductance, measured at 1kHz, 0.27V 7.62 2-part epoxy resin type 3300A and 3300B (0.3) (series equivalent circuit):125mH per winding (nominal) UL file number 218090 22.9 +/- 0.2 15.24 C Interwinding capacitance* ( 10kHz): (0.9 +/- 0.008) L (0.6) or Epoxylite EIP4728: UL file no. E143115 primary to secondary: 43pF typical Core: class B (49% Ni) EE laminations Primary to screen: 70pF Winding wire: ECW. UL file no. E174837 C L Secondary to screen: 90pF Tape:3M No. 56 polyester or equivalent Proof voltage: primaries to screen: 1kVrms 2.54 (0.1) 17.78 screen to secondaries: 1kV rms (0.7) Power: 100mW 300Hz and 1mW 30Hz 27.94 +/- 0.2 (1.1 +/- 0.008) oo Operating temperature range: -20 C to +70 C Pin view oo Storage temperature range: -25 C to + 120 C Tolerance on all dimensions in millimetres: +/- 0.1mm unless stated otherwise. Inches shown in brackets. Tolerance on dimensions in inches: +/- 0.005 N.B. Do not pass DC through windings Pin size: 0.7mm (0.0276 ) * primary windings in series and secondary windings in series DESCRIPTION ISSUE DATE DRAWN CHECKED DRAWING NUMBER Unit 5, Oxonian Park, Langford Locks, 1 29/07/02 CS Kidlington, Oxfordshire. OX5 1FP Specification for A262A6E 5 21/04/08 CS Tel: (01865) 855085 Fax: (01865) 855075 page 1 of 2 A262A6E 6 15/12/08 CS Website: www.oep.co.uk Scale: nts All dimensions in mm unless stated otherwise 7 15/06/11 CS Issue 4 Q1066 YYWWInsertion loss, source impedance 600R, level 0dBm, windings in series, secondary loaded with 560R Return loss: source impedance 600R, level 0dBm, windings in series, secondary loaded with 560R Frequency (Hz) 1 10 100 1000 10000 100000 Frequency Hz -10 -1 1 10 100 1000 10000 100000 -1.5 -15 -2 -2.5 -3 -20 -3.5 -4 -25 -4.5 -5 -30 -5.5 -6 -35 Frequency response, windings in series, source impedance: 600R, level: 0dBm, secondary loaded with 560R Distortion: windings in series, source impedance: 600R level 0dBm, secondary loaded with 560R 1 3 0.5 2.5 0 1 10 100 1000 10000 100000 2 -0.5 1.5 -1 -1.5 1 -2 0.5 -2.5 0 -3 10 100 1000 10000 100000 Frequency Hz Frequency Hz DESCRIPTION ISSUE DATE DRAWN CHECKED DRAWING NUMBER Unit 5, Oxonian Park, Langford Locks, 1 29/07/02 CS Kidlington, Oxfordshire. OX5 1FP Specification for A262A6E 5 21/04/08 CS Tel: (01865) 855085 Fax: (01865) 855075 page 2 of 2 A262A6E 6 15/12/08 CS Website: www.oep.co.uk Scale: nts All dimensions in mm unless stated otherwise 7 15/06/11 CS Issue 4 Q1066 % T HD dBm dBm dBm