Hypodermic and Hypodermic and Mini Hypodermic Probes Mini Hypodermic Probes All probes were designed for industrial, laboratory, manufacturing and chemical research only. They are not intended for medicinal Thermocouple and RTD Elements Thermocouple and RTD Elements use, or on humans. OMEGA assumes no responsibility if these products are used for medicinal purposes, or on humans, or are misused in any way. Miniature HYP Series connector. OMEGA Hypodermic Needle The HYP0 is a mini-hypodermic area. Binocular microscope micro- Temperature Probes are probe, with 0.2 mm (0.008 ) manufacturing techniques result in designed for industrial, laboratory, diameter. The HYP1 has an OD of an extremely small type T (Copper- manufacturing and chemical 0.3 mm (0.012 ), and has an added Constantan) thermocouple being research applications. Five probe feature of being steam autoclavable implanted in a 33 gage, 25 mm (1 ) types are available, with diameters to temperatures up to 160C (325F). long stainless steel hypodermic THERM HYP-1 from 0.2 to 1.65 mm (0.008 to The HYP3 and HYP4 are industrial needle. The HYP0 has the fastest 0.065 ). The HYP0, HYP1 and probes, with thermocouple and RTD response of the hypodermic probes, HYP2 have type T (Copper- elements respectively. and has a continuous temperature Constantan) thermocouple elements, rating of 200C (400F). It has 1.5 m The HYP0 Mini Hypodermic probe while the HYP3 is available in J, K, T (5 long PFA coated, 36 AWG leads with a needle diameter of only or E calibration, and the HYP4 has a with an SMP type subminiature 0.2 mm (0.008 ) is the least likely 100 Platinum RTD (a = 0.00385). connector. to disturb the surrounding insertion 18.25 25 Thermocouple Probe Model HYP0 Dimensions: mm (inch) (0.72) (1) The HYP0 mini-hypodermic probe with a needle diameter of only 0.2 mm (0.008 ) is the least likely With shrink tubing 1.57 0.20 not shown (0.062) O.D. (0.008) O.D. to disturb the surrounding insertion area. Binocular microscope micro-manufacturing techniques result To Order in an extremely small Type T (copper-constantan) thermocouple being implanted in a 33 gauge, Model No. ANSI Color Code 25 mm (1 ) long stainless steel hypodermic HYP0-33-1-(*)-G-60-SMPW-M Dimensions: mm (inch) needle. The HYP0 has the fastest response of Specify calibration: K, or T. T = Copper-Constantan, K = CHROMEGA -ALOMEGA * the hypodermic probes, and has a continuous Lead wire lengths over 1.5 m (60 ) at an additional cost/300 mm (12 ) and modify temperature rating of 200C (400F). It has 1.5 m model number. Ordering Example: HYP0-33-1-T-G-60-SMPW-M, mini hypodermic probe with (5 ) long PFA-coated, 36 AWG leads with an Type T grounded thermocouple, 1.5 m (5) long bead wire, and a miniature SMP-type miniature connector. SMPW male connector. Thermocouple Probe Model HYP1 OMEGA Research, autoclavable probe is designed to give instant readings in plants, other semi-solids and liquids. A 30 gage x 15 mm needle provides this very THERM HYP-1 Subminiature Probe fast response. The measurable temperature range is These probes should not be used for cryogenic to 200C (400F). This is a Type T (Copper- human implantation Constantan) grounded-junction probe with PFA insulated extension wire and a subminiature male connector termination. The entire assembly is steam autoclavable Model No. ANSI Color Code to a temperature of 160C (325F). All probes have HYP1-30-1/2-(*)-G-60-SMPW-M 1.5 m (5 ) leads. Specify calibration: K, T, or E. K = CHROMEGA -ALOMEGA , * 18.25 15.08 Dimensions: T = Copper-Constantan, E = CHROMEGA -Constantan (0.72) (0.59) mm (inch) For lead wire lengths over 1.5 m (60 ) at an additional cost/300 mm (12 ) and modify model number. With shrink tubing Ordering Example: HYP1-30-1/2-T-G-60-SMPW-M, 1.57 0.30 not shown. (0.062) O.D. (0.012) O.D. thermocouple probe. A-93 Dimensions: mm (inch)Custom-Designs Available in Length, Dimension and Insulation Consult our Custom-Design Department for Details. 108 REF A (4.25) Dimensions: 27 27 38 mm (inch) (1.06) (1.06) (1.50) 0.81 (0.032) 6.4 (0.250) Thermocouple Probe Model HYP2 and HYP5 HYP2 The HYP2 and HYP5 Probes have Natural Science, Industrial HYP5 with and Food Processing uses. These assemblies comes complete SMPW connector. with a Type T (Copper-Constantan) element, 1.2 m (4 ) PFA insulated lead wires , and uses a standard (21 gage) hypodermic needle 38 mm (1.5 ) long. 1.2 m (4 ) lead wire is standard. Standard size male connector terminates the lead wire. OSTW connector Model No. ANSI Color Code included on HYP2. HYP2-21-1-1/2-(*)-G-48-OSTW-M Shown smaller HYP2-21-1-1/2-(*)-G-48-SMPW-M than actual size. HYP5-21-1-1/2-(*)-G-SMPW-M HYP5 does not have lead wires Specify calibration: J, K, T, or E. * J = Iron-Constantan T = Copper-Constantan * These probes should not be K = CHROMEGA -ALOMEGA E = CHROMEGA -Constantan used for human implantation. Easy grip handle, add EGH suffix, for additional cost. For lead wire lengths over 1.2 m (48 ) at an additional cost/300 mm (12 ) and modify model number. Ordering Example: HYP2-21-1-1/2-T-G-48-OSTW-M, Type T grounded junction probes. Thermocouple Probe Model HYP3 OMEGA Industrial Hypodermic Probe uses a 16 gage Add an SMPW connector, x 38 mm (1.5 ) long needle and may contain J, K, T, E see ordering example. Shown smaller calibrations they may have a grounded or ungrounded than actual size. junction, and come with stainless steel overbraided extension wire. The stainless steel overbraiding adds flexibility and extends the probe life. These probes are not autoclavable. Now Available They are designed for heavy-duty service. 1.2 m (4 ) lead These probes should not be wire is standard. Maximum tip temperature is 200C (400F). M8/M12 used for human implantation. CONNECTORS Model No. ANSI Color Code 36 38 HYP3-16-1-1/2-(*)-(**)-48-RP 31.8 (1.19) (1.5) (1.25) When ordering, specify calibration and whether grounded or ungrounded junction is desired Specify calibration: J, K, T, or E. J = Iron-Constantan * 1.65 Dimensions: T = Copper-Constantan K = CHROMEGA -ALOMEGA 6.4 (0.065) OD mm (inch) E = CHROMEGA -Constantan (0.25) OD Specify measuring junction style: U or G ** For a male straight M8 plug add M8-S-M to the model number for Also Available: R and S (platinum)consult factory for price and additional cost, for a male straight M12 plug add M12-S-M to the delivery. model number for additional cost. Easy Grip Handle, add EGH suffix, for additional cost For a male right-angled M8 plug add M8-R-M to the model For lead wire lengths over 1.2 m (48 ) at an additional cost/300 mm number for additional cost, for a male right-angled M12 plug add (12) and modify model number. M12-R-M to the model number for additional cost. To add an SMPW male connector add suffix -SMPW-M to model Ordering Example: HYP3-16-1-1/2-K-G-48-SMPW-M, Type K number for additional cost. grounded junction probe with 1.2 m (48 ) leads. RTD Probe Model HYP4 Shown smaller than actual size. The RTD Hypodermic Probes are offered for Industrial, Natural Sciences and Food Processing use. These probes Add an MTP connector, contain a 100 platinum RTD (a = 0.00385) within a 16 gage see ordering example. x 38 mm (1.5 ) hypodermic needle, and come with 1.2 m (4 ) PFA insulated lead wire. Model No. ANSI Color Code Now Available HYP4-16-1-1/2-100-EU-48-RP M8/M12 All probes were designed for industrial, laboratory, manufacturing and These probes should not be CONNECTORS chemical research only. They are not intended for medicinal use, or used for human implantation. on humans. OMEGA assumes no responsibility if these products are used for medicinal purposes, or on humans, or are misused in any way. 28.6 38 31.8 (1.125) (1.5) (1.25) For lead wire lengths over 1.2 m (48 ) at an additional cost/300 mm (12 ) and modify model number. For a male straight M8 plug add M8-S-M to the model number for additional cost, for a male straight M12 plug add M12-S-M to the Dimensions: 1.65 6.4 model number for additional cost. (0.065) OD mm (inch) (0.25) OD For a male right-angled M8 plug add M8-R-M to the model number Ordering Example: HYP4-16-1-1/2-100-EU-48-MTP-M, RTD hypodermic for additional cost, for a male right-angled M12 plug add M12-R-M to probe with 1.2 m (48 leads) and MPT-U male connector. the model number for additional cost. To add an MPT-U male connector add suffix -MTP-M for additional cost. A-94