8 or 16 Channel Universal Input Touch Screen Data Logger OM-DAQXL Stylus (included). OM-DAQXL shown smaller than actual size. U 7 Touch Screen TFT Display U 8 or 16 Analog Channel Inputs U 8 or 16 Virtual (Math) Channels U 8 Digital I/O (4 Inputs, 4 Outputs) OM-DAQXL is an 8 or 16 channel analog input portable U Measures Voltage, Current, Thermocouples, data logger with a 7 inch resistive touch color display. RTDs, Thermistors, Strain Gage, All inputs are programmable and can be configured for millivolts, volts, milliamps, thermocouple, RTD, thermistor, Frequency and Pulse strain gauge, or frequency. All the menus, selections, U 24-Bit Analog Input Resolution and configurations can be done from the display touch U F ast Sampling Rate125 Samples/Sec screen. The unit also has 4 digital inputs, 4 digital outputs, 4 alarm outputs, one USB host port and one USB device (1 Channel) port. The unit also has 3 LEDs for different indications U 4 Alarm Outputs (Power, Alarm and Logging). U Large Data Storage: 1 GB Internal Memory, The OM-DAQXL comes complete with protective rubber 32 GB SD Card or 32 GB USB Drive boot, rechargeable lithium ion battery, 32 GB SD card, one plastic stylus, 1 GB USB thumb drive, 1.8 m (6 ) USB U USB Device (PC Communication) and cable, 1.8 m (6 ) digital I/O cable, alarm/excitation terminal USB Host (USB Drive, Mouse, etc.) block, universal AC adaptor, screwdriver, quick start U Powers from Rechargeable Lithium-Ion guide, set of 5 PTFE insulated Type K thermocouples, set of 5 ferrites to install on the thermocouple inputs (for Battery and/or AC Adaptor noise reduction) and crimp-on ground lug. The unit can U Protective Rubber Boot be wall mounted using the provided keyhole mount or U Benchtop or Wall Mount Enclosure Design operated on a bench using the tilt stand. 1Home Screen The home screen is the main screen of the data loggers user interface. It is divided into 3 distinct sections as shown below. Status/information display Data display area Navigation toolbar Line graph display. Digital Display View Status/Information Display: This status bar provides information such as Battery Charge percentage, System Clock (displays current Time & Date), Lock/ Unlock data logger, status of the 4 Alarm Outputs, and Logging Mode indication. Digital display. Data Display Area: This is the area where different inputs (up to 4 Channels) are displayed vs. time. The data is displayed in 4 different ways: Waveform, Waveform & Table, Table only, and Digital. In the Digital The OM-DAQXL comes complete with hard carrying case, view, each channel name and number are displayed protective rubber boot, rechargeable lithium ion battery, 32 GB along with the value. SD card, one plastic stylus, 1 GB USB thumb drive, 1.8 m (6 ) USB cable, 1.8 m (6 ) digital I/O cable, alarm/excitation terminal Navigation Toolbar: This toolbar provides access block, universal AC adaptor, screwdriver, quick start guide, set to all the functions and menus of the data logger. of 5 PTFE insulated Type K thermocouples, set of 5 ferrites to You can extend or retract the toolbar by pressing the install on the thermocouple inputs (for noise reduction) and crimp-on ground lug. Not all items shown. See User Guide for Tool button. The following flow chart shows all the instructions on installing ferrites on the thermocouple inputs. functionalities of the buttons of the toolbar. 2