A9TS22-0012 Omron

Ultra subminiature Toggle Switch A9TS Ultra subminiature size. Gold-plated clip contact ensure high reliability. The sealed bottom prevents flux penetration. Washable, equivalent to IP64 (IEC-60529). A9TS is smaller than A9T. Height: A9T 17mm A9TS 11mm (35% smaller than A9T) RoHS Compliant Typical Applications Security Control Boards Electric Power Instrumentation Program Controllers List of Models Actuator Shape Standard Terminal Shape DIP Terminal Right Angle Terminal Vertical Mount Terminal Switching Functions SPDT DPDT SPDT DPDT SPDT DPDT ON ON A9TS11-0011 A9TS21-0011 A9TS11-0012 A9TS21-0012 A9TS11-0013 A9TS21-0013 ON OFF ON A9TS12-0011 A9TS22-0011 A9TS12-0012 A9TS22-0012 A9TS12-0013 A9TS22-0013 Quantity per tray 100 25 50 Note: 1. Lever do not stop at position. 2. Switching Functions show the view from the side of Type and Brand name marking. Ratings/Characteristics Rating (resistive load) 14 mA at 28 VAC/DC, 0.1 A (minimum current) at 20 mVAC/DC Ambient operating temperature 20 C to +80 C 60% RH max. (with no icing or condensation) Ambient operating humidity 45 to 85% RH (at +5 to +35 C) Insulation resistance 500 M min. (at 500 VDC with insulation tester) Contact resistance (initial value) 80 m max. Dielectric strength 500 VAC for 1min between terminals, between terminals and ground Vibration resistance Malfunction 10 to 55 Hz, 1.5-mm double amplitude 2 Shock resistance Malfunction 500 m/s min. Durability Mechanical 50,000 operations min. Electrical 50,000 operations min. Degree of protection IEC IP64 Washing Possible Operating forcse 4.9 N max. Weight 0.3 g 1A9TS A9TS Dimensions (Unit: mm) DIP Terminal Models 11 3.8 2.54 1.6 (5.6) 1.7 dia. 0.45 0.3 0.2 (6) (3) (6) (3) 2.54 4 28 7 (2) (5) (2) 2.54 (4) (1) (4) (1) Marking Side Double Pole Type Single Pole Type Note: NO.(4) and (6) terminals in the SPDT models are dummys to support the Switch case. Right Angle Terminal Models 11 3.8 1.6 (5.6) 0.45 1.7 dia. 0.2 (3) (6) (3) 2.54 284 (2) (5) (2) 7 2.54 (1) (4) (1) Double Pole Type Marking Side Single Pole Type 0.3 2.6 3.1 5.08 2.54 Vertical Mount Terminal Models 11 3.8 2.54 1.6 (5.6) 1.7 dia. 0.3 (3) (6) (3) 4 28 7 (2) (5) (2) (1) (4) (1) Marking Side 0.45 5.08 Single Pole Type Double Pole Type 2.54 2.54 Note: Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. 2